Cascading Garden Chandelier Earrings (Reboot)

Name: Cascading Garden Chandelier Earrings (Reboot)
Brand: Beadaholique
SKU: PROJ-PD-E0010
Availability: OutOfStock

PROJECT PROJ-PD-E0010

Designer: PRESTIGE Crystal Components

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Nothing says spring and summer quite like bountiful gardens full of pretty flowers. These earrings embody the essence of the season and will add an elegant touch to your wardrobe.
Reboot: We have rebooted this project to feature PRESTIGE Round Classic Cut pendants instead of the pear pendants shown in the photo. We have kept all the colors the same.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These earrings have wonderful movement to them with all their dangles!

Begin by placing 1 bicone onto the long wire part of the earring hook. Create a simple wire loop after the bead and trim off excess wire.
Onto an eye pin, place 3 bicones and then create a simple wire loop after the last one. Trim off excess wire.
Look at your lotus connector and position it so that the wider part with all the petals is facing down. Onto one of the large side petals, open and connect a jump ring to it as well as one of the loops on your jasmine flower link. Close the jump ring. One the other end of that same jasmine connector, attach another jump ring as well as your PRESTIGE Round Classic Cut pendant. Close the jump ring. Repeat on the other side of the lotus flower connector so that you now have two dangles on your soon-to-be earring.
Onto the middle petal of the lotus flower connector, attach your 3-bicone eye pin segment that you made in a previous step. You can attach it by opening the loop the same way that you would open a jump ring.
On the other side of the 3-bicone eye pin segment, attach a PRESTIGE Round Classic Cut pendant using a jump ring.
At the top of the lotus flower connector, attach your earring hook by opening and closing the loop at its base.
Repeat all steps to make the other earring.

WHAT YOU'LL NEED: (scroll down for purchase options)

M0F1-NA3G - Earring Findings, Hypo-Allergenic Niobium French Hooks 22mm / 20 Gauge, Matte Silver Color, by TierraCast (2 Pairs)
Project uses 1 pair. You will need 1 package(s).

FCO-017 - TierraCast Pewter Connector Links, Open Lotus Flower Design 19x23.5mm Antiqued Silver Plated (2 Pieces)
Project uses 2 piece(s). You will need 1 package(s).

FCO-3073 - TierraCast Fine Silver Plated Pewter Star Jasmine Flower Connector Links 16mm (2 Pieces)
Project uses 6 piece(s). You will need 3 package(s).

FJR-5404 - TierraCast Silver Plated Brass Open Oval Jump Rings 6mm 20 Gauge (50 Pieces)
Project uses 10 piece(s). You will need 1 package(s).

FHP-6261 - Open Eye Pins, 2 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)
Project uses 2 piece(s). You will need 1 package(s).

PRES-6430-AMY8 - PRESTIGE Crystal, #6430 Round Classic Cut Pendant 8mm, Amethyst (1 Piece)
Project uses 6 piece(s). You will need 6 package(s).

PRES-5328-AMYLTS4 - PRESTIGE Crystal, #5328 Bicone Bead 4mm, Light Amethyst Shimmer (1 Piece)
Project uses 8 piece(s). You will need 8 package(s).

RECOMMENDED TOOLS:

XTL-5032 - The Beadsmith Wire Looping Pliers - Concave And Round Nose
XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers

Additional Information

Theme	Spring
Ingredients	M0F1-NA3G, FCO-017, FCO-3073, FJR-5404, FHP-6261, PRES-6430-AMY8, PRES-5328-AMYLTS4,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring
How to Create a Simple Wire Loop

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.

Earring Findings, Hypo-Allergenic Niobium French Hooks 22mm / 20 Gauge, Matte Silver Color, by TierraCast (2 Pairs)

            Earring Findings, Hypo-Allergenic Niobium French Hooks 22mm / 20 Gauge, Matte Silver Color, by TierraCast (2 Pairs)
        
You will need 1 package(s).
1 package = 2 Pairs.

                $2.69
            
             / Package | SKU: M0F1-NA3G

Sold out

TierraCast Pewter Connector Links, Open Lotus Flower Design 19x23.5mm Antiqued Silver Plated (2 Pieces)

            TierraCast Pewter Connector Links, Open Lotus Flower Design 19x23.5mm Antiqued Silver Plated (2 Pieces)
        
You will need 1 package(s).
1 package = 2 Pieces.

                $3.59
            
             / Package | SKU: FCO-017

TierraCast Fine Silver Plated Pewter Star Jasmine Flower Connector Links 16mm (2 Pieces)

            TierraCast Fine Silver Plated Pewter Star Jasmine Flower Connector Links 16mm (2 Pieces)
        
You will need 3 package(s).
1 package = 2 Pieces.

                $2.69
            
             / Package | SKU: FCO-3073

Sold out

TierraCast Silver Plated Brass Open Oval Jump Rings 6mm 20 Gauge (50 Pieces)

            TierraCast Silver Plated Brass Open Oval Jump Rings 6mm 20 Gauge (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $2.85
            
             / Package | SKU: FJR-5404

Open Eye Pins, 2 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)

            Open Eye Pins, 2 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $4.25
            
             / Package | SKU: FHP-6261

PRESTIGE Crystal, #6430 Round Classic Cut Pendant 8mm, Amethyst (1 Piece)

            PRESTIGE Crystal, #6430 Round Classic Cut Pendant 8mm, Amethyst (1 Piece)
        
You will need 6 package(s).
1 package = 1 Piece.

                $1.49
            
             / Package | SKU: PRES-6430-AMY8

PRESTIGE Crystal, #5328 Bicone Bead 4mm, Light Amethyst Shimmer (1 Piece)

            PRESTIGE Crystal, #5328 Bicone Bead 4mm, Light Amethyst Shimmer (1 Piece)
        
You will need 8 package(s).
1 package = 1 Piece.

                $0.22
            
             / Package | SKU: PRES-5328-AMYLTS4