Click or scroll to zoom
Tap or pinch to zoom
Khepri Earrings (Reboot)
Click or scroll to zoom
Tap or pinch to zoom
Khepri Earrings (Reboot)
Click or scroll to zoom
Tap or pinch to zoom
Khepri Earrings (Reboot)
Khepri Earrings (Reboot)

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Khepri Earrings (Reboot)

PROJECT E7062
Designer: Rachel Zaimont
Skill Level: Beginner
Dazzling Austrian crystal chatons in Scarabaeus Green, framed by Nunn Design bezels, dangle from statement-making ear wires in these striking, fiery earrings.
Reboot: We have rebooted this project with mesmerizing PRESTIGE crystals in Laguna DeLite LacquerPRO.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

In addition to the materials listed, you will also need a toothpick or scrap of wire. By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
  1. Take a bit of E6000 glue on the tip of a toothpick or a scrap of wire. Dab the glue around the inner edge of 1 Nunn Design open back bezel. Take 1 Austrian crystal crystal chaton and press it into the bezel. Let the glue dry for 14-16 hours, or overnight.
  2. Using flat nose pliers, open the loop on the end of one ear wire the same way you would open a jump ring. Slide on the loop at the top of the open back bezel charm, with the crystal facing forward. Close the loop of the ear wire.
  3. Enjoy your earrings!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-906 - Nunn Design Open Back Bezel Charm, Circle 12x16mm, 1 Piece, Bright Silver
    Project uses 2 pieces. You will need 2 packages.

  • SWCH-639563 - Austrian Crystal, 1088 Xirius Round Stone Chatons ss39, 6 Pieces, Scarabaeus Green
    Project uses 2 pieces. You will need 1 package.

  • FEA-108 - Nunn Design Earring Findings, Open Oval Hoop Ear Wire with Loop 15.5x44mm, 1 Pair, Bright Silver
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Summer, St. Patrick's Day, Special Occasion
Ingredients FEA-108, PND-906, PRES-1088-LAGDE39SS, XTL-1054,
Useful Techniques & Learning Guides
How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: FEA-108
You will need 2 package(s).
1 package = .
/ Package | SKU: PND-906
You will need 2 package(s).
1 package = .
/ Package | SKU: PRES-1088-LAGDE39SS
You will need 1 package(s).
1 package = .
/ Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:
/ Package | SKU: XTL-5511

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Related Products: Design Variations

Sold out
from

Sold out
from

Sold out
from

Sold out
from

You recently viewed

Clear recently viewed