Ultra Violet Vortex Kumihimo Bracelet

PROJECT B2283
Designer: Kat Silvia
Skill Level: Intermediate
Get wrapped up in an Ultra Violet Vortex of kumihimo braiding with this triple wrap beaded bracelet.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This triple wrap bracelet measures approximately 6.5 inches. To modify the length, simply adjust the number of beads on the braid respectively. Please note that the clasp adds about 1 inch. You will also need scotch tape for this project.
  1. To start this project, please watch our video: How to Braid Beaded Kumihimo and Make a Bracelet. You will see the basic technique of what we will be doing for this wrap bracelet.
  2. Cut 8 strands of cord, 6 feet each.
  3. Gather the ends 8 cords and tie an overhand knot to secure them together.
  4. Place the knot through the middle hole of the Kumihimo Disc and secure the gator weight to the knot.
  5. Place the cords into the notches on either side of the placement dots.
  6. Before adding beads and winding the bobbins, you are going to add a small bit of glue to the ends of each cord to form a "needle". Please watch our video to see this tip: Use Super New Glue on Cord to form a Needle for Easy Stringing. Do this for each strand. It will take about 30 minutes for the glue to fully dry.
  7. Next you will be adding beads. On the four strands between 31-32, 32-1 and 7-8, 24-25; you will add 180 gold beads to each strand. Wind the ends into the bobbins.
  8. On the four strands between 8-9, 23-24 and 15-16, 16-17; you will add 180 purple beads to each strand. Wind the ends into the bobbins.
  9. Begin the braiding as shown in the video with 1 inch without beads before adding the beads.
  10. Once you have added all the beads, finish with 1 inch without beads. Trim the ends and tie and overhand knot.
  11. Then take a small piece of scotch tape and wrap it around the braided, un-beaded portion of the braid. Then trim the cords so that you have 1/4 inch to fit into the well of the clasp.
  12. Separate the magnetic clasp. Add a few drops of Super New Glue to the well of one end of the clasp and place this end into the well. Tip: It does help to gently twist it into the clasp to get all the cords coated for a firm hold. Move on to the other side of the bracelet and repeat. Be sure to let the clasp dry separated.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • DMRR-0352 - Miyuki Round Seed Beads, 11/0 Size, 8.5 Gram Tube, 352 Purple Lined Aqua
    Project uses 1 Tube. You will need 1 package.

  • DMRR-1052 - Miyuki Round Seed Beads, 11/0 Size, 8.5 Gram Tube, 1052 Galvanized Dyed Yellow Gold
    Project uses 1 Tube. You will need 1 package.

  • FCR-4226 - 22K Gold Plated Magnetic Tube Cord Ends/Clasps - Fits Up To 3.2mm Cord (4 Sets)
    Project uses 1 piece. You will need 1 package.

  • XCR-4247 - BeadSmith Super-Lon (S-Lon) Cord - Size 18 Twisted Nylon - Violet / 77 Yard Spool
    Project uses 1 Spool. You will need 1 package.

  • XTL-1059 - Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5614 - BeadSmith Tools, Thread Snips 4.25 Inches Long, 1 Piece
  • XTL-6095 - Beadsmith Lightweight Kumihimo Round Disc Disk For Japanese Braiding and Cording 35mm Hole
  • XTL-6062 - Kumi Weight With Gator Clip For Kumihimo Braiding - 3.1 Ounces (1)
  • XTL-6108 - No Tangle Flexible Plastic Thread Bobbins For Kumihimo Or Macrame 2 1/2 Inch (8 Pack)
Additional Information
Theme Summer
Ingredients FCR-4226, XCR-4247, XTL-1059, JSK-0277, JSK-0307,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Magnetic Clasps, Tube Cord Ends Fits 3.2mm Cord, 22K Gold Plated (4 Sets)
You will need 1 package(s).
1 package = 4 Sets.
$5.99 / Package | SKU: FCR-4226
Super-Lon, S-Lon, Cord - Size 18 Twisted Nylon - Violet / 77 Yard Spool
You will need 1 package(s).
1 package = 1 Spool.
$4.87 / Package | SKU: XCR-4247
Eurotool Super New Glue - Heavy Duty Adhesive - 3 Gram Bottle
You will need 1 package(s).
1 package = 1 Bottle.
$2.59 / Package | SKU: XTL-1059
Toho Round Seed Beads 11/0 #PF557 'Galvanized Starlight' 8g
You will need 1 package(s).
1 package = 1 Tube.
$3.95 / Package | SKU: JSK-0277
Toho Round Seed Beads 11/0 #252 'Aqua/Purple Lined' 8g
You will need 1 package(s).
1 package = 1 Tube.
$2.69 / Package | SKU: JSK-0307
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Tools, Thread Snips 4.25 Inches Long (1 Piece)

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed