Chevron Dagger Earrings

Name: Chevron Dagger Earrings
Brand: Beadaholique
SKU: E839
Availability: InStock

PROJECT E839

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Featuring two visually bold design elements, chevron chain and a mini arrowhead flat tag, these earrings are striking and modern. The choice of bright silver findings set against the matte gold chain and tag helps to add to the drama of the design.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Begin by cutting a 2 inch length of chain.
Open a jump ring and link it to your flat tag pendant. Close the jump ring.
Open a second jump ring and link it to the previously attached jump ring and the end of your cut chain. Close the jump ring.
Go to the other side of the chain and attach a jump ring. Close the jump ring. Attach a second jump ring to the just attached jump ring and also link onto it the loop at the base of the earring hook. Close the jump ring.
Enjoy!

WHAT YOU'LL NEED: (scroll down for purchase options)

FEA-3025 - Silver Plated Long Elegant Earring Hooks (50)
Project uses 1 pair. You will need 1 package.

CHA-0703 - Matte Gold Plated Bulk Chain, Chevron Links 6.5mm, Sold By the Foot
Project uses 4 inches. You will need 1 package.

FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 8 pieces. You will need 1 package.

PND-125 - Nunn Design Flat Tag Pendant, Mini Arrowhead 10x18mm, 1 Piece, Antiqued Gold
Project uses 2 pieces. You will need 2 packages.

RECOMMENDED TOOLS:

XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Ingredients

FEA-3025, CHA-0703, FJR-5140, PND-125,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.

Earring Findings, Long Elegant Hooks 25mm, Silver Plated (25 Pairs)

            Earring Findings, Long Elegant Hooks 25mm, Silver Plated (25 Pairs)
        
You will need 1 package(s).
1 package = 25 Pairs.

                $7.79
            
             / Package | SKU: FEA-3025

Matte Gold Plated Chevron Chain, 6.5mm by the Foot

            Matte Gold Plated Chevron Chain, 6.5mm by the Foot
        
You will need 1 package(s).
1 package = 1 Foot.

                $8.49
            
             / Package | SKU: CHA-0703

Sold out

Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100 pcs)

            Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $2.39
            
             / Package | SKU: FJR-5140

Nunn Design Flat Tag Pendant, Mini Arrowhead 10x18mm, Antiqued Gold (1 Piece)

            Nunn Design Flat Tag Pendant, Mini Arrowhead 10x18mm, Antiqued Gold (1 Piece)
        
You will need 2 package(s).
1 package = 1 Piece.

                $3.59
            
             / Package | SKU: PND-125