Retired - Wisteria Circlet Earrings

PROJECT E8017
Designer: Alexandra Smith
Skill Level: Intermediate
A gentle gradient of purple patinas cover these embossed Vintaj circle frames, altered using the Sizzix BIGkick machine. Pollen yellow frond charms create vivid contrast.
Instructions
By following the instructions below, you will make one earring. Repeat all instructions to make the second earring. In addition to the materials listed, you will also need some paper towels.
  1. Please watch the video: How to Use the Vintaj BIGkick Machine to Etch and Emboss Metal Stampings. Using what you have learned in the video, take your circle frame and place it into the Vintaj Dragonfly Pond DecoEmboss Die. Position the die onto the BIGkick machine over the flowers to achieve a petal stamping, and run it through as shown in the video.
  2. Once you are satisfied with your embossed stamping, prepare a clean work space to begin painting your circle frame with patina. Using your paint brush, apply Chalcedony Patina, Opalite Patina, and Purple Amethyst Patina to the top, center, and bottom thirds of your circle frame respectively (see photo for reference), rinsing the paint brush after each color. Quickly use a paper towel to gently wipe off some of the patina to reveal the embossed design underneath. Repeat this process on the opposite side of your stamping.
  3. Use the side of your Vintaj Relief Block and buff the raised areas on both sides of your stamping to show off the detail. Then let the patina dry for 15 minutes.
  4. Next, take one of your fern charms and use your paint brush to cover the surface with Ochre Patina. Again use a paper towel to gently wipe off the desired amount of patina and buff the surface with your Vintaj relief Block to return some of the metal shine. Let dry for 15 minutes and rinse your paint brush.
  5. Once all of your patina has dried, use your paint brush to apply a coat of Patina Glaze to each piece. Again let dry for 15 minutes. Apply Glaze to both sides of each piece.
  6. Now you are ready to assemble your earring. Using pliers, open the loop of your earring hook the same way you would open a jump ring and slide on your fern charm, facing forward. Then slide on your circle frame stamping. Close the loop. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-7787 - Vintaj Natural Brass Circle Frame Pierced Stamping 34mm (2)
    Project uses 2 pieces. You will need 1 package.

  • FEA-6621 - Vintaj Vogue Earring Components, French Ear Wire 20x10mm, 6 Pieces, Raw Brass
    Project uses 2 pieces. You will need 1 package.

  • PND-7254 - Vintaj Natural Brass Fastenables Fern Curving Left Leaf Charms 30x12mm (2)
    Project uses 2 pieces. You will need 1 package.

  • XTL-9090 - Vintaj Mini Glaze - Metal Sealer And Patina Extender - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-1133 - Vintaj Patina, Opaque Permanent Ink For Metal, 0.5 Ounce, Chalcedony
    Project uses 1 bottle. You will need 1 package.

  • XTL-9069 - Vintaj Patina Opaque Permanent Ink - Purple Opalite - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-9061 - Vintaj Patina Opaque Permanent Ink - Purple Amethyst - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-9068 - Vintaj Patina Opaque Permanent Ink - Yellow Ochre - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-1200 - Sizzix BIGkick Die Cut Machine - Vintaj Special Edition - Cut, Emboss, And Etch!
  • XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding
  • XTL-1207 - Vintaj DecoEmboss Die For Sizzix Bigkick Machine - Dragonfly Pond
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-880 - ICE Resin, Angled Paint Brushes for ICED Enamels & Paper Sealant, 6 Pack
Additional Information
Ingredients PND-7787, FEA-6621, PND-7254, XTL-9090, XTL-1133, XTL-9069, XTL-9061, XTL-9068,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Vintaj Natural Brass Circle Frame Pierced Stamping 34mm (2)
You will need 1 package(s).
1 package = 2 Pieces.
$2.89 / Package | SKU: PND-7787
Vintaj Vogue Earring Components, French Ear Wire 20x10mm, 6 Pieces, Raw Brass
You will need 1 package(s).
1 package = 6 Pieces.
$2.99 / Package | SKU: FEA-6621
Vintaj Natural Brass Fastenables Fern Curving Left Leaf Charms 30x12mm (2)
You will need 1 package(s).
1 package = 2 Pieces.
$2.25 / Package | SKU: PND-7254
Vintaj Mini Glaze - Metal Sealer And Patina Extender - 0.5 Ounce Bottle
You will need 1 package(s).
1 package = 1 Bottle.
$4.75 / Package | SKU: XTL-9090
Vintaj Patina, Opaque Permanent Ink For Metal, 0.5 Ounce, Chalcedony
You will need 1 package(s).
1 package = 0.5 Ounce.
$5.35 / Package | SKU: XTL-1133
Vintaj Patina Opaque Permanent Ink - Purple Opalite - 0.5 Ounce Bottle
You will need 1 package(s).
1 package = 1 Bottle.
$5.19 / Package | SKU: XTL-9069
Vintaj Patina Opaque Permanent Ink - Yellow Ochre - 0.5 Ounce Bottle
You will need 1 package(s).
1 package = 1 Bottle.
$7.49 / Package | SKU: XTL-9068
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Vintaj Metal Relief Block For Filing, Buffing & Sanding
Beadsmith Jewelry Fine Round Nose Micro Pliers
$7.49 / Package | SKU: XTL-5514
Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed