Retired - Wings of Strength Necklace

PROJECT N3022
Designer: Karlin Jones
Skill Level: Beginner
This necklace features a beautiful faux turquoise cabochon in a bezel setting nestled between a pair of silver plated wings. It's understated in its beauty but quite striking.
Instructions
This necklace measures 16" long.
  1. Use a pair of chain nose pliers to bend the top scallop on an antique silver plated oval bezel cup out until it sits flat, angling straight up.
  2. Place a dab of E6000 glue on the back of a faux turquoise cabochon and press it into place in the bezel cup. Allow the glue to dry thoroughly before continuing.
  3. Open up a jump ring using your chain nose pliers and slide on the loop from your bezel cup. Don't close your jump ring just yet.
  4. Measure the center point of your finished chain, which should be at 8".
  5. Next, slide your open jump ring onto that center link. Close your jump ring using your chain nose pliers.
  6. Open up a jump ring with your chain nose pliers and slide it through the hole at the top of your wing pendant. Do this also with your other wing pendant. Do not close the jump rings yet.
  7. Next, slide on one of your jump rings onto the third chain link on the right side of your cabochon. Repeat this process on the other side with your other wing pendant. Close the jump rings.
  8. Your necklace is now ready.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • AXC-98934 - Silver Plated Drawn Cable Chain Necklace - 4.5x2.5mm Links 16 Inches Long
    Project uses 1 piece. You will need 1 package.

  • FJR-5219 - Silver Plated Open Jump Rings 6mm 20 Gauge (50)
    Project uses 3 pieces. You will need 1 package.

  • PND-6759 - Nunn Design Antiqued Silver Plated Oval Bezel Cup Pendant Lace Edge 18x13mm x2
    Project uses 1 piece. You will need 1 package.

  • SPCB-348 - Faux Blue Turquoise W/ Matrix Glass Cabochon 18x13mm Oval (1)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • PND-5592 - TierraCast Antiqued Silver Plated Lead-Free Pewter Wing Charms 28mm (2)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients AXC-98934, FJR-5219, PND-6759, SPCB-348, XTL-1054, PND-5592,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Drawn Cable Chain Necklace - 4.5x2.5mm Links 16 Inches Long
You will need 1 package(s).
1 package = 1 Piece.
$3.09 / Package | SKU: AXC-98934
Silver Plated Open Jump Rings 6mm 20 Gauge (50)
You will need 1 package(s).
1 package = 50 Pieces.
$1.59 / Package | SKU: FJR-5219
Faux Blue Turquoise W/ Matrix Glass Cabochon 18x13mm Oval (1)
You will need 1 package(s).
1 package = 1 Piece.
$1.75 / Package | SKU: SPCB-348
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$1.42 / Package | SKU: XTL-1054
TierraCast Antiqued Silver Plated Lead-Free Pewter Wing Charms 28mm (2)
You will need 1 package(s).
1 package = 2 Pieces.
$3.60 / Package | SKU: PND-5592
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed