Retired - Windfall Necklace

PROJECT N188
Designer: Andrea Morici
Skill Level: Beginner
With its mixture of warm antiqued copper and brass and its rich cluster of Austrian crystal and lucite leaves, this necklace is the perfect Autumn accessory.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Cut two pieces of chain eight inches in length and set them aside.
  2. Move on to making the pendant. Onto a copper headpin, thread a 4mm dark red coral Austrian crystal bicone and a fluted antiqued copper bead. Create a wrapped wire loop and trim off excess wire. Onto another copper headpin, thread a 4mm crystal copper Austrian crystal bicone and a diamond cut out antiqued brass bead. Create a wrapped wire loop and trim off excess wire.
  3. Open two small antiqued brass jump rings. To one of the jump rings, add the red lucite maple leaf and the headpin dangle containing the brass bead and the crystal copper bicone. To the other jump ring, add the brown aspen leaf and the headpin dangle containing the copper bead and the dark red coral bicone. Close the two jump rings.
  4. Gently pry open the antiqued brass pinch bail, only wide enough to fit over the large Austrian crystal leaf pendant. Line the two prongs of the pinch bail up with the hole in the Austrian crystal leaf pendant and carefully squeeze it shut using either your fingers or a pair of nylon jaw pliers.
  5. Now open the extra large Vintaj brass jump ring. Thread the following on in this order: one of the eight inch lengths of chain, the jump ring containing the brown lucite aspen leaf and headpin dangle, the Austrian crystal leaf pendant, the jump ring containing the red lucite maple leaf and headpin dangle, and the other eight inch length of chain. Close the large jump ring again.
  6. To one end of the chain, add the jump ring part of the clasp. To the other end of the chain, add the other part of the clasp.
Keywords:leaf, leaves, autumn, fall, btq-natureWHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9672 - Antiqued Copper Plated Cable Chain 3.4mm Bulk By The Foot
    Project uses 2 feet. You will need 1 package.

  • SWC-9134 -
    Project uses 1 piece. You will need 1 package.

  • BCP-4312 - Lucite Maple Leaves Matte Ruby Red Light Weight 19mm (6)
    Project uses 1 piece. You will need 1 package.

  • BCP-4323 - Lucite Aspen Leaves Matte Smokey Topaz Brown Light Weight 16mm (4)
    Project uses 1 piece. You will need 1 package.

  • SWBI-1413 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Crystal Copper
    Project uses 1 piece. You will need 1 package.

  • SWBI-1488 -
    Project uses 1 piece. You will need 1 package.

  • BMB-5303 - Antiqued Copper Plated Fluted Round Beads 5.5mm (72 Beads)
    Project uses 1 piece. You will need 1 package.

  • BMB-5190 - Antiqued Brass Diamond Cut Out 6mm Round Beads (100)
    Project uses 1 piece. You will need 1 package.

  • FHP-1035 - Head Pins, 2 Inches Long and 22 Gauge Thick, 50 Pieces, Copper
    Project uses 2 pieces. You will need 1 package.

  • FJR-5347 - Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5335 - Vintaj Natural Brass Open Jump Rings 15mm Heavy 15 Gauge (10)
    Project uses 1 piece. You will need 1 package.

  • FCO-4023 -
    Project uses 1 piece. You will need 1 package.

Additional Information
Theme Autumn
Ingredients BCP-4312, FHP-1035, FJR-5347,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Lucite Maple Leaves Matte Ruby Red Light Weight 19mm (6 Pieces)
You will need 1 package(s).
1 package = 6 Pieces.
$0.61 / Package | SKU: BCP-4312
Head Pins, 2 Inches Long and 22 Gauge Thick, Copper (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.09 / Package | SKU: FHP-1035
Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25 Pieces)
You will need 1 package(s).
1 package = 25 Pieces.
$2.59 / Package | SKU: FJR-5347
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed