Retired - Wearing of the Green Necklace

PROJECT N212
Designer: Andrea Morici
Skill Level: Intermediate
Show your Irish pride this St. Patty's Day, or throughout the entire year with this lovely green pendant necklace.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Using a pair of chain nose pliers (XTL-5511) gently pry open the prongs on the antiqued brass bezel, just enough to accommodate the green magnesite cabochon.
  2. Place the cabochon into the bezel setting and close the prongs around it. To get a tight fit, you can gently roll the prongs down on a hard, scratch-proof surface, such as a bench block (XTL-6091).
  3. Open an antiqued brass jump ring and thread it through the loop at the top of the pendant. Close the jump ring once more.
  4. Cut your chain to the desired length, (our necklace is sixteen and a half inches long, but you can make it longer or shorter if you'd like) and thread it through the jump ring at the top of the pendant.
  5. Open one half of the figure eight shaped clasp piece the same way you would open a jump ring. Thread this through the last link at one end of the chain. Close the figure eight half of the clasp once more.
  6. Open the loop on the hook half of the clasp. Thread this loop through the link at the opposite end of the chain. Close the loop once more, and you're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-7191 - Vintaj Natural Brass Open Work Bezel Setting For 25x18mm Oval Cabochon (1)
    Project uses 1 piece. You will need 1 package.

  • SPCB-23 -
    Project uses 1 piece. You will need 1 package.

  • FCL-4642 - Vintaj Natural Brass Tiny Hook And Eye Clasps 21mm (4 Sets)
    Project uses 1 piece. You will need 1 package.

  • FJR-7001 - TierraCast Brass Oxide Finish Brass Open Jump Rings 7.7mm 16 Gauge (25)
    Project uses 1 piece. You will need 1 package.

  • CHA-7190 - Vintaj Natural Brass 3.5mm Round Rolo Chain - Bulk By The Foot
    Project uses 2 feet. You will need 2 packages.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme St. Patrick's Day
Ingredients FJR-7001,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
TierraCast Brass Oxide Finish Brass Open Jump Rings 7.7mm 16 Gauge (25 Pieces)
You will need 1 package(s).
1 package = 25 Pieces.
$3.25 / Package | SKU: FJR-7001
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed