Retired - Veronica Earrings in Pink

Name: Retired - Veronica Earrings in Pink
Brand: Beadaholique
SKU: E2026
Availability: OutOfStock

PROJECT E2026

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This is a great project to make if you have any extra scraps of chain because this project doesn't need a long piece of chain to make a big statement.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Cut two inches of chain.
Thread the chain through the loop of the drop earring pendant.
Open a jump ring and attach both sides of the chain to the open jump ring. Before you close it, also attach the ring of the post earring. Make sure the earring drop will face the front before closing the jump ring. Close the jump ring.
Place the earring back on the post earring.

WHAT YOU'LL NEED: (scroll down for purchase options)

FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
Project uses 2 pieces. You will need 1 package.

CHA-99970 - Bright 22K Gold Plated Long And Short Chain 2.5x4.5mm - Bulk By The Foot
Project uses 4 inches. You will need 1 package.

FEA-1501 - TierraCast 22K Gold Plated Pewter Stud Earrings Dome Post & Ring 8mm
Project uses 2 pieces. You will need 1 package.

FEA-1012 - Bullet Clutch Earring Backs, Hypo Allergenic 5.7x5mm, 50 Pieces, Gold Tone
Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Additional Information

Ingredients

FJR-5250, CHA-99970, FEA-1501, FEA-1012,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

22K Gold Plated Open Jump Rings 5mm 20 Gauge (100 pcs)

            22K Gold Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $4.87
            
             / Package | SKU: FJR-5250

Sold out

22K Gold Plated Figaro Chain, 2.5mm, by the Foot

            22K Gold Plated Figaro Chain, 2.5mm, by the Foot
        
You will need 1 package(s).
1 package = By the Foot.

                $2.29
            
             / Package | SKU: CHA-99970

Earring Posts, Stud Dome with Ring 8mm, 22K Gold Plated Pewter, by TierraCast (1 Pair)

            Earring Posts, Stud Dome with Ring 8mm, 22K Gold Plated Pewter, by TierraCast (1 Pair)
        
You will need 1 package(s).
1 package = 1 Pair.

                $4.69
            
             / Package | SKU: FEA-1501

Earring Backs, Hypo Allergenic Bullet Clutch 5.5x5mm, Gold Tone (25 Pairs)

            Earring Backs, Hypo Allergenic Bullet Clutch 5.5x5mm, Gold Tone (25 Pairs)
        
You will need 1 package(s).
1 package = 25 Pairs.

                $3.29
            
             / Package | SKU: FEA-1012