Retired - Urban Ball Necklace - Rose Gold

Retired - Urban Ball Necklace - Rose Gold

Name: Retired - Urban Ball Necklace - Rose Gold
Brand: Beadaholique Exclusive
SKU: N744
Availability: OutOfStock

PROJECT N744

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF

This simple long necklace is one of those accessories that will go with just about every outfit and the pave crystal bead at the base has just enough sparkle to have your friends saying 'that is so cool!'

Instructions

This necklace is quite long, 36". If you want a shorter necklace, just cut your chain accordingly before you begin this project.

Place onto a head pin 1 Beadelle pave crystal bead. After the bead, create a wrapped wire loop. NOTE: Make sure your wrapped wire loop is large enough to thread your chain through in the next step.
Thread one end of your chain through the wrapped wire loop you just made.
Your rose gold lobster clasp comes with two jump rings already attached. They are both closed jump rings. If you have a good sharp pair of flush cutters, you can very carefully cut a slit in each of the jump rings to turn them into open jump rings. If you do not have a sharp pair of flush cutters to make a clean cut, you might want to connect a 4mm or 5mm open jump ring to each of the closed jump rings and then also attach these jump rings to the end chain links on your chain.
All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

BDLL-0110 - Beadelle Crystal 10mm Round Pave Bead - Rose Gold Plated / Crystal (1 Piece)
Project uses 1 piece. You will need 1 package.

CHA-6134 - Genuine Copper Cable Chain 2.3mm x 1.8mm - By The Foot
Project uses 36 inches. You will need 3 packages.

FCL-2051 -
Project uses 1 piece. You will need 1 package.

FHP-1039 - Head Pins, 1.5 Inches Long and 22 Gauge Thick, 50 Pieces, Copper
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Special Occasion, Bridal
Ingredients	BDLL-0110, CHA-6134, FCL-2051, FHP-1039,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            Copper Cable Chain 1.8mm, by the Foot
        
You will need 3 package(s).
1 package = By The Foot.

                $10.25
            
             / Package | SKU: CHA-6134

Head Pins, 1.5 Inches Long and 22 Gauge Thick, 50 Pieces, Copper

            Head Pins, 1.5 Inches Long and 22 Gauge Thick, 50 Pieces, Copper
        
You will need 1 package(s).
1 package = 50 Pieces.

                $2.39
            
             / Package | SKU: FHP-1039