Retired - Tribal Trio Necklace

PROJECT N3085
Designer: Karlin Jones
Skill Level: Beginner
Three tiers of layering necklaces featuring Amethyst Czech glass cathedral beads, turquoise gemstone chips and a natural brass arrowhead charm make this accessory on-trend and easy to
Instructions
The 3 chain tiers in this necklace measure 18", 20" and 22".
  1. Using your flush cutters, cut the following lengths of chain lengths: Two lengths of 9", two lengths of 10" and one length of 22" chain. Set aside.
  2. Next, onto a gold plated eye pin, slide on 5 Czech glass cathedral beads in Amethyst and create a simple wire loop using your round nose pliers. Snip off any excess wire using your flush cutters.
  3. Open the simple wire loop on one end (how you would a jump ring) and slide on the last link from one side of one 10" chain length and close. Repeat the same thing on the other side with the last link from one end of your second length of 10" chain. See photo.
  4. Repeat the same process as above and add 8 turquoise chip beads onto an eye pin. Create a simple wire loop after the beads are on. Snip off excess wire. Open and attach the eye pin onto your two lengths of 9" chain in the same manner as above. See photo for placement assistance.
  5. Next, using the side of your Vintaj relief block, buff the front side of your Vintaj arrowhead charm to show off more detail.
  6. Open a gold plated jump ring and slide it through the loop of your charm. Close the jump ring. Slide the charm onto your longest 22" length of chain.
  7. Next, open a gold plated jump ring using your chain nose pliers and slide on the last links from one side of all 3 lengths of chain. Add them on in order of length. Close the jump ring.
  8. Repeat on the other side as well, but also add on the loop from your gold plated lobster claw clasp and close.
  9. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-99958 - 22K Gold Plated Slim Rolo Chain 2mm Bulk By The Foot
    Project uses 60
Additional Information
Theme Boho
Ingredients CHA-99958, SPTU-12, PND-7539, BCP-6302, FHP-6258, FCL-2529, FJR-5240,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
22K Gold Plated Fine Rolo Chain, 2mm, by the Foot
You will need 5 package(s).
1 package = By The Foot.
$2.75 / Package | SKU: CHA-99958
Vintaj Natural Brass Stamping Pendant - Native Arrowhead 19 x 10mm (2)
You will need 1 package(s).
1 package = 2 Pieces.
$3.50 / Package | SKU: PND-7539
22K Gold Plated Open Eye Pins 22 Gauge 2 Inch (x50)
You will need 1 package(s).
1 package = 50 Pieces.
$4.69 / Package | SKU: FHP-6258
22K Gold Plated Straight Lobster Claw Clasps 9mm (10)
You will need 1 package(s).
1 package = 10 Pieces.
$5.79 / Package | SKU: FCL-2529
22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
You will need 1 package(s).
1 package = 100 Pieces.
$2.89 / Package | SKU: FJR-5240
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Vintaj Metal Relief Block For Filing, Buffing & Sanding
Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Beadsmith Jewelry Fine Round Nose Micro Pliers
$7.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed