Retired - The Royal Treatment Necklace

PROJECT N1002
Designer: Megan Milliken
Skill Level: Beginner
This necklace features an antique silver crown pendant hanging in front of a brass pendant with an etched sunburst design. The pretty vine pattern on the back of the crown pendant shows through a little window
Instructions
  1. Use a pair of chain nosed pliers to open a 6 mm, 20 gauge antique silver plated jump ring. Place a 13 mm antique silver plated Nunn Design square crown pendant on the jump ring, and then place an 18 mm Vintaj Natural Brass etched square pendant charm behind it on the ring. Make sure that the Nunn Design pendant is facing crown side up. Close the jump ring.
  2. Cut an 18" length of 2 mm antique silver plated round rolo chain with a pair of flush cutters.
  3. Thread the length of chain through the 6 mm jump ring holding the pendants.
  4. Use a 4 mm, 21 gauge antique silver plated jump ring to attach a 12 mm antique silver plated lobster clasp to one end of the chain, and attach a second 4 mm jump ring to the other end of the chain.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9705 - Antiqued Silver Plated Round Rolo Chain 2mm Bulk By The Foot
    Project uses 2 feet. You will need 2 packages.

  • FCL-2527 - Antiqued Silver Plated Sleek Lobster Claw Clasps 12mm (6)
    Project uses 1 piece. You will need 1 package.

  • FJR-3092 - Antiqued Silver Plated Open Jump Rings 4mm 21 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • FJR-3094 - Antiqued Silver Plated Open Jump Rings 6mm 18 Gauge (50)
    Project uses 1 piece. You will need 1 package.

  • PND-6908 -
    Project uses 1 piece. You will need 1 package.

  • PND-7126 - Vintaj Natural Brass Etched Square Toggle Pendant Charm 18mm (1)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients CHA-9705, FCL-2527, FJR-3092, FJR-3094, PND-6908, PND-7126,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Silver Plated Rolo Chain, 2mm, by the Foot
You will need 2 package(s).
1 package = By The Foot.
$2.45 / Package | SKU: CHA-9705
Antiqued Silver Plated Curved Lobster Claw Clasps 12mm (6)
You will need 1 package(s).
1 package = 6 Pieces.
$3.35 / Package | SKU: FCL-2527
Antiqued Silver Plated Open Jump Rings 4mm 21 Gauge (50)
You will need 1 package(s).
1 package = 50 Pieces.
$1.99 / Package | SKU: FJR-3092
Antiqued Silver Plated Open Jump Rings 6mm 18 Gauge (50)
You will need 1 package(s).
1 package = 50 Pieces.
$4.35 / Package | SKU: FJR-3094

Tools and Other Supplies:

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece

Related Video [VIEW ALL VIDEOS]

You recently viewed

Clear recently viewed