Retired - The Duchess Cocktail Ring

PROJECT R1020
Designer: Megan Milliken
Skill Level: Beginner
This ring is a sparkling focal piece that is sure to grab some attention. The colors blend beautifully and have a pretty vintage feel.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Before you begin, watch the instructional video: How to Make the Desi Earrings. This video will walk you through a process that is very similar to the one you will use to make this ring.
  2. Cut a piece of 18pp brass cup chain in turquoise that is 28 links long.
  3. Cut a piece of 24pp brass cup chain in crystal that is 16 links long.
  4. Cut a piece of 18pp brass cup chain in pearl that is 14 links long.
  5. Apply a layer of E6000 glue into the bottom of a 30mm gold tone bezel ring.
  6. Place the turquoise cup chain along the outer edge of the bezel, collapsing the spaces between the links down so that the links touch.
  7. Place the crystal cup chain just inside the turquoise cup chain, and then the pearl cup chain just inside that.
  8. Add a little bit more glue to the center, and then place an 11mm vitrail medium round chaton into the center.
  9. The chaton should sit just on the edge of the pearl cup chain. Make sure that it's sitting level.
  10. Allow all of the glue to dry thoroughly before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FRG-0850 - Gold Tone Brass 30mm Round Bezel Adjustable Ring (1)
    Project uses 1 piece. You will need 1 package.

  • BCP-10717 - Czech Glass Table Cut -Round Chatons Pointed Foiled Back Vitrail Medium 11mm (4)
    Project uses 1 piece. You will need 1 package.

  • CHA-10121 - Czech Crystal Brass Rhinestone Cup Chain 18PP Turquoise (By The Foot)
    Project uses 4 inches. You will need 1 package.

  • CHA-10109 - Czech Crystal Brass Rhinestone Cup Chain 24PP Crystal (By The Foot)
    Project uses 3 inches. You will need 1 package.

  • CHA-10101 - Czech Glass White Pearl On Brass Cup Chain PP18 (By The Foot)
    Project uses 2 inches. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Vintage Look
Ingredients CHA-10121, CHA-10109, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Preciosa Czech Crystal Rhinestone Cup Chain, 18PP, Turquoise/Brass, by the Foot
You will need 1 package(s).
1 package = 1 Foot.
$2.69 / Package | SKU: CHA-10121
Preciosa Czech Crystal Rhinestone Cup Chain, 24PP, Crystal/Brass, by the Foot
You will need 1 package(s).
1 package = 1 Foot.
$2.45 / Package | SKU: CHA-10109
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed