Retired - Sunset Swirl Earrings

PROJECT E638
Designer: Lidia Ramos
Skill Level: Beginner
A pretty matte gold twist pendant is the focal point of these lovely dangle earrings. Accenting the gold swirls are sparkling Austrian crystals.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Remember to double all these instructions to make your matched pair of earrings.
  1. Begin by opening up 1 matte gold jump ring. Link this jump ring to 1 Austrian crystal crystal baroque pendant in crystal golden shadow and the bottom hoop on your matte gold elegant twist pendant (the hoop that faces forward, not off to the side). Close the jump ring back up.
  2. Take 1 head pin and cut the head off of it, as close to the base as you can. Create a wrapped wire loop on one end of the head pin. Before you create your wraps, link the loop that you just made to the loop at the other end of your matte gold elegant twist pendant. Finish your wraps. Place onto the wire 1 6mm Austrian crystal round bead in crystal golden shadow. Create a wrapped wire loop right after the bead and cut off excess wire with flush cutters.
  3. Open the loop at the base of your french ear wire the same way you would open a jump ring. Link onto this loop the wrapped wire loop at the top of the beaded "dangle" segment that you have been creating in all the previous steps. Close the loop back up.
  4. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FEA-02060 - Earring Hooks, French Wire with Coil 19mm Long, 4 Pieces, 14K Gold Filled
    Project uses 2 pieces. You will need 1 package.

  • FHP-5219 - 22K Gold Plated Head Pins - 2 Inches Long/24 Gauge Wide (50 Pieces)
    Project uses 2 pieces. You will need 1 package.

  • FJR-3100 - Matte 16K Gold Plated Open Jump Rings 6mm 20 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • PND-0513 - Matte 16Kt Gold Plated Elegant Twist Pendant Link 27mm
    Project uses 2 pieces. You will need 2 packages.

  • SWC-0608 - Austrian Crystal, 5000 Round Beads 6mm, 10 Pieces, Crystal Golden Shadow
    Project uses 2 pieces. You will need 1 package.

  • SWC-9608 - Austrian Crystal, 6090 Baroque Pendant 16x11mm, 2 Pieces, Crystal Golden Shadow
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Bridal
Ingredients FEA-02060, FHP-5219, FJR-3100,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Hooks, French Wire with Coil 19mm Long 14K Gold-Filled (2 Pairs)
You will need 1 package(s).
1 package = 2 Pairs.
$5.09 / Package | SKU: FEA-02060
Head Pins, 2 Inches Long and 24 Gauge Thick, 22K Gold Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.75 / Package | SKU: FHP-5219
Matte 16K Gold Plated Open Jump Rings 6mm 20 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.89 / Package | SKU: FJR-3100
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed