Retired - Spring Flirt

PROJECT E602
Designer: Julie Bean
Skill Level: Beginner
The snow has melted and spring has arrived, celebrate with these cheerful and flirty sterling silver beaded earrings that will sparkle in the sun's rays.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Remember to double all the directions so as to make your matching pair of earrings.
  2. Begin by threading onto a 2" sterling silver ball head pin a 3mm round crystal Austrian crystal bead, a czech pressed glass rondelle spacer in olivine green, a 6mm rondelle Austrian crystal bead in greige, another olivine rondelle spacer, and another 3mm round crystal bead. Using your round nose pliers, create a wrapped wire loop at the end and cut off excess wire using your flush cutters. Make 2 of these.
  3. Thread onto a 2" sterling silver head pin a 4 mm bicone Austrian crystal bead in light amethyst and a 6mm rondelle Austrian crystal bead in greige. Create a wrapped wire loop. Make 2 of these.
  4. Thread onto a 2" sterling silver head pin a 4 mm bicone Austrian crystal bead in light amethyst and a 6mm rondelle Austrian crystal bead in greige, and a 3mm round crystal Austrian crystal bead. Create a wrapped wire loop.
  5. Next, wire wrap your 7mm x 28mm cubic zirconia briolette in light olivine green so that you have a wrapped wire loop at the top and then the end of your head pin that has the ball on it is wrapped around the upper body of the bead. It's ok to be loose and free-form with this portion of the wrapping, you want it to be a little abstract and not perfect, it will give the earrings an artistic flare. Repeat this same technique with 2 of your smaller flat briolettes in olivine green.
  6. Open up one 8mm sterling silver jump ring and slide all your above jewelry elements onto it through their loops at the top. You can put the elements onto the jump ring in any order you choose.
  7. Take one of your long elegant sterling silver ear wires and slide one end of the jump ring through the bottom hole of the ear wire. Close the jump ring.
  8. Have a wonderful spring!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FJR-03089 - Sterling Silver Open Jump Rings 8mm 18 Gauge Heavy (10)
    Project uses 2 pieces. You will need 1 package.

  • SPCZ-204 -
    Project uses 2 pieces. You will need 2 packages.

  • FHP-3221 - Fancy Sterling Silver 1.5mm Ball Head pins 24 Gauge 2 Inch (10)
    Project uses 2 pieces. You will need 2 packages.

  • FEA-8566 - Sterling Silver Long Elegant Earring Hooks Ear Wires 33mm (1 Pair)
    Project uses 2 pieces. You will need 1 package.

  • BCP-4673 - Czech Pressed Glass Beads 6 x 2mm Rondelle Spacers Olivine Green (25)
    Project uses 2 pieces. You will need 1 package.

  • SWC-0300 - Austrian Crystal, 5000 Round Beads 3mm, 20 Pieces, Crystal
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Ingredients FJR-03089, FHP-3221, FEA-8566, BCP-4673,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-03089
Head Pins, with Ball Head 2 Inches Long and 24 Gauge Thick Sterling Silver (10 Pieces)
You will need 2 package(s).
1 package = 10 Pieces.
$5.79 / Package | SKU: FHP-3221
Earring Findings, Long Elegant Hooks 33mm 19 Gauge, Sterling Silver (1 Pair)
You will need 1 package(s).
1 package = 1 Pair.
$9.99 / Package | SKU: FEA-8566
Czech Glass Beads 6x2mm Rondelle Spacers Olivine Green (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.39 / Package | SKU: BCP-4673
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed