Retired - Spokes and Gears Necklace

PROJECT N730
Designer: Julie Bean
Skill Level: Beginner
The Spokes and Gears Necklace is an urban chic statement piece with a distinctive nod to Steampunk design. C-Koop enameled gears pop against the dark black Vintaj Arte Metal chain.
Instructions
Tip: Instead of using really large jump rings to connect our gears together, we are instead going to use separated out oval chain links from a Vintaj Arte Metal Chain.
  1. Begin this necklace by opening and separating out 8 Vintaj Arte Metal long oval links. You can open these just like jump rings, do not close them at this time.
  2. Using the open links from above as jump rings, connect together your C-Koop gears in the following order: 1 red 19mm gear, 1 25mm gray gear, 1 25mm orange gear, 1 25mm black gear, and 1 19mm red gear.
  3. Cut your Vintaj Arte Metal flat cable links chain into two 6 inch segments.
  4. Use one of your long oval links to connect one of the 6 inch chain lengths to one of the red C-Koop gears. On the other side of the 6 inch piece of chain, use another long oval link to connect one half of your Vintaj Arte Metal hook and eye clasp.
  5. Repeat the previous step on the other side of your necklace.
  6. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9001 - Vintaj Arte Metal Chain 4mm x 3.5mm Flat Cable Links - Bulk By The Foot
    Project uses 12 inches. You will need 1 package.

  • CHA-9002 -
    Project uses 3 inches. You will need 1 package.

  • FCL-4900 - Vintaj Arte Metal Tiny Hook And Eye Clasps 21mm (4 Sets)
    Project uses 1 set. You will need 1 package.

  • PND-0412 -
    Project uses 1 piece. You will need 1 package.

  • PND-0413 -
    Project uses 1 piece. You will need 1 package.

  • PND-0411 -
    Project uses 1 piece. You will need 1 package.

  • PND-0420 - C-Koop Enameled Copper Medium Cog Wheel Stamping Flame Red 19mm (1)
    Project uses 2 pieces. You will need 2 packages.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients CHA-9001, CHA-9002, FCL-4900, PND-0412, PND-0413, PND-0411, PND-0420,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed