Retired - Sparkly Stars Adjustable Bangle

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Open up a gold plated jump ring with your chain nose pliers and slide it onto the bent wire loop on the right side of your adjustable wire bangle and close. Open up another jump ring and slide it onto that first jump ring. Before closing, also slide on the loop from your 18x22mm Nunn Design star charm and close.
2. Next, slide your Beadelle crystal pave bead onto a gold plated ball head pin. Using your round nose pliers, create a simple wire loop and snip off the excess wire using your flush cutters.
3. Repeat this process with your two other topaz Beadelle beads. Add each onto a ball head pin and create simple wire loops.
4. Open up the simple wire loop from one of your topaz beads (how you would a jump ring) and slide it onto the bottom bar on the front side of your adjustable wire bangle and close. See photo for reference.
5. Next, open up a jump ring and slide it onto the bar next to the topaz bead. Close the jump ring. Open up another jump ring and slide it onto the first jump ring and also slide on the the loop from a 11x15mm Nunn Design star charm and close.
6. Repeat the process of adding beads onto the bracelet. Add on your crystal Beadelle bead followed by your second topaz bead. See photo.
7. You're done!

• JB-2578 -
  Project uses 1 piece. You will need 1 package.


• BDLL-0604 - Beadelle Crystal 6mm Round Pave Beads - Gold Plated / Lt Colorado Topaz (2 Pc)
  Project uses 2 pieces. You will need 1 package.


• BDLL-6254 - Beadelle Crystal Candy 8mm Round Pave Clay Bead Crystal (1 Piece)
  Project uses 1 piece. You will need 1 package.


• PND-05156 - Nunn Design Charm, 11x15mm Nautical Star, 1 Piece, Antiqued Gold
  Project uses 1 piece. You will need 1 package.


• PND-05104 - Nunn Design Stamping Charms, 18x22mm Nautical Stars, 2 Pieces, Brass
  Project uses 1 piece. You will need 1 package.


• FHP-3029 - 22K Gold Plated Ball Head Pins 24 Gauge 1.5 Inch (x20)
  Project uses 3 pieces. You will need 1 package.


• FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
  Project uses 4 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose