Retired - Sonja Necklace

Name: Retired - Sonja Necklace
Brand: Beadaholique
SKU: N1019
Availability: OutOfStock

PROJECT N1019

Designer: Megan Milliken

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

A beautiful ceramic bead from Golem Studio hangs from a silk ribbon and a chunky chain in this necklace. This piece will add a great touch of flair to any everyday look.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Begin by watching the video: How to Attach Ribbon to a Jump Ring.
Trim the tapered end off of one side of a length of olive green silk ribbon. Using the method shown in the video, attach this end to a 22k gold plated 7mm, 18 gauge jump ring.
Slide a Golem Studio glazed ceramic lentil bead onto your ribbon a few inches from the jump ring.
Measure about 10" from the point at which the jump ring is attached and cut the ribbon. Attach the free end to a second 7mm jump ring.
Use a pair of flush cutters to cut two 5" lengths of 22k gold plated flat oval cable chain.
Use the 7mm jump rings to attach one length of chain to each end of the ribbon.
Use a 4mm, 22 gauge 22k gold plated jump ring to attach a 22k gold plated lobster clasp to one end of the chain. You will use the last link on the other end to attach to the clasp.
Slide your ceramic bead to the center of the ribbon. The two sides of this bead are slightly different, so you can flip the bead to the side that you prefer.

WHAT YOU'LL NEED: (scroll down for purchase options)

BWC-495 - Golem Design Studio Ceramic Beads, 23mm Glazed Lentil Poppy Flower, 2 Pieces, Blue/Red
Project uses 1 piece. You will need 1 package.

XCR-48054 -
Project uses 1 strand. You will need 1 package.

CHA-99988 - Bright 22K Gold Plated Flat Oval Cable Chain 6mm - Bulk By The Foot
Project uses 1 foot. You will need 1 package.

FCL-2543 - 22K Gold-Plated Sterling Silver Lobster Clasps 13mm (1)
Project uses 1 piece. You will need 1 package.

FJR-3914 - 22K Gold Plated Open Jump Rings 4mm 20 Gauge 22k Gold Plated (100)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Ingredients

CHA-99988, FJR-3914,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

22K Gold Plated Flat Cable Chain, 6mm, by the Foot

            22K Gold Plated Flat Cable Chain, 6mm, by the Foot
        
You will need 1 package(s).
1 package = By the Foot.

                $10.45
            
             / Package | SKU: CHA-99988

22K Gold Plated Open Jump Rings 4mm 20 Gauge 22k Gold Plated (100 pcs)

            22K Gold Plated Open Jump Rings 4mm 20 Gauge 22k Gold Plated (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $4.05
            
             / Package | SKU: FJR-3914