Retired - Rustling Leaves Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Please watch our video: How to Use Vintaj Patinas and Glaze.
2. Note that you can follow the placement of the Patina by referring to the photo or you can choose your own placement for a unique design.
3. Begin by adding a few drops of Emerald Patina to a scrap of paper on your work surface. Take a paint brush and dab the patina on to the front of the filigree stamping in your desired area. Quickly dab and wipe off the excess Patina with a paper towel so the color remains in the crevices of the design. You may also want to not wipe away some of the color, but please note that patina dries very quickly.
4. Repeat the above step with the other colors to get your desired look.
5. Open the loop of one earring finding the same way you would a jump ring and string on the painted filigree piece so that it is facing forward and close the earring loop.

• PND-5731 - Antiqued Silver Plated Stamping Filigree Beads Right Leaf 20mm (2)
  Project uses 2 pieces. You will need 1 package.


• FEA-3091 - Antiqued Silver Plated Plated Fish Hook Earring Hooks (50)
  Project uses 2 pieces. You will need 1 package.


• XTL-9083 -
  Project uses 1 piece. You will need 1 package.


• XTL-9067 -
  Project uses 1 piece. You will need 1 package.


• XTL-9062 -
  Project uses 1 piece. You will need 1 package.

• XTL-880 - ICE Resin, Angled Brushes for ICED Enamels & Paper Sealant, 6 Pack
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers