Retired - Naomi Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. For instructions for how to do this technique please watch our video: How to Make Free Form Wire Loops.
2. Using the Wubbers Bail Making Pliers, make a wire segment as shown in the video with the 18 gauge wire. You can model it after the video or you can make your own form.
3. Clip the wire using your flush cutters. To round any sharp edges, use the Wooden Wire Rounder Tool.
4. Next, take the 26 gauge wire and wire wrap the Czech Glass Druks on to your form as seen in the video.
5. To the appropriate loop, attach the earring hook by opening the loop of the earring finding, in the same way you would a jump ring.
6. All done!

• WCR-4350 - Vintaj Brass Bronze Colored Copper Wire 18 Gauge 30 Feet (1 Spool)
  Project uses 1 Spool. You will need 1 package.


• WCR-4349 - Vintaj Brass Bronze Colored Copper Wire 26 Gauge 120 Feet (1 Spool)
  Project uses 1 Spool. You will need 1 package.


• BCP-78405 - Czech Glass Druk Round Beads 8mm Crackle Blue/Light Green (25)
  Project uses 4 pieces. You will need 1 package.


• FEA-6620 - Vintaj Natural Brass Classic French Ear Wire 20mm (2 Pair)
  Project uses 2 pieces. You will need 1 package.

• XTL-0032 - Wubbers Bail Making Jewelry Pliers - Large 7mm & 9mm Size
• XTL-5606 - Vintaj Special Edition - Wire And Rivet Flush Cutter
• XTL-0131 - Wire Rounder Tool With Wooden Handle 1.8mm Cup Bur
• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose