Retired - Mother's Treasures Necklace

PROJECT N1006
Designer: Megan Milliken
Skill Level: Advanced
This lovely necklace in an antique silver finish features personalized stamped disks with the names and birthstones of a mother's children. It would make a beautiful, heartfelt gift for any mother.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Be sure to customize the number of blanks, names, and rhinestone colors to the children of the mother that you are making your necklace for.
  1. Before you begin, watch the video: How to Make a Name Stamped Mother's Necklace. Follow the instructions in the beginning of the video through the stamping and filling in of the letters. Once the video moves on to dapping, you do not need to finish watching for the purposes of this project.
  2. Using the technique demonstrated in the video, stamp the names of the children onto 19 mm antique silver plated round stamping blank. Then, use a black permanent marker to fill in the letters as shown in the video.
  3. Next, you will need to affix a size 34ss Austrian crystal crystal flatback rhinestone onto each blank. Apply a small amount of E6000 glue to the back of the first rhinestone using a toothpick or scrap of craft wire. Press the rhinestone onto the center of the blank for the correct name. Repeat with the rest of the rhinestones and blanks. Allow the glue to dry for at least an hour before moving on.
  4. Use a pair of flush cutters to cut an 18" length of antique silver plated 3.5 mm round rolo chain.
  5. Use an antique silver plated 6 mm, 20 gauge jump ring to hang one of the name tags onto the chain. Repeat this process to hang the rest of the name tags onto the chain.
  6. Use an antique silver plated 4 mm, 21 gauge jump ring to attach a 12 mm antique silver plated lobster clasp to one end of your chain.
  7. Attach another 4 mm jump ring to the other end of your chain.
  8. Allow the glue to dry for at least 24 hours before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9967 - Antiqued Silver Plated Round Rolo Chain 3mm Bulk By The Foot
    Project uses 2 feet. You will need 2 packages.

  • FCL-2527 - Antiqued Silver Plated Sleek Lobster Claw Clasps 12mm (6)
    Project uses 1 piece. You will need 1 package.

  • FJR-3092 - Antiqued Silver Plated Open Jump Rings 4mm 21 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • FJR-3094 - Antiqued Silver Plated Open Jump Rings 6mm 18 Gauge (50)
    Project uses 3 pieces. You will need 1 package.

  • PND-5850 - Antiqued Silver Plated Blank Stamping Circle Pendants 19mm (2)
    Project uses 3 pieces. You will need 2 packages.

  • SWF-43449 - Austrian Crystal, Round Flatback Rhinestone SS34 7mm, 12 Pieces, Emerald
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-0248 - Eurotool Brass Mallet For Metal Smithing - 1 Pound
  • XTL-0264 - Eurotool Dual Utility Bench Block 3 x 3 Inches - Steel Anvil With Wood Base
  • XTL-0717 - 27 Pc Uppercase Lucida Calligraphy Alphabet Letter Punch Set For Stamping Metal In Wood Box 3mm
  • XTL-0716 - 27 Pc Lowercase Lucida Calligraphy Alphabet Letter Punch Set For Stamping Metal In Wood Box 3mm
Additional Information
Ingredients CHA-9967, FCL-2527, FJR-3092, FJR-3094, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Silver Plated Rolo Chain, 3mm, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$3.47 / Package | SKU: CHA-9967
Lobster Clasps, Curve 12mm, Antiqued Silver Plated (6 Pieces)
You will need 1 package(s).
1 package = 6 Pieces.
$4.35 / Package | SKU: FCL-2527
Antiqued Silver Plated Open Jump Rings 4.5mm 21 Gauge (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$1.49 / Package | SKU: FJR-3092
Antiqued Silver Plated Open Jump Rings 6mm 18 Gauge, (50 Pieces)
You will need 1 package(s).
1 package = Each.
$2.39 / Package | SKU: FJR-3094
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed