Retired - Midnight Glam Necklace

PROJECT N3102
Designer: Karlin Jones
Skill Level: Beginner
Sparkling with sumptuous dark crystal, the Midnight Glam Necklace will add glam rock style to any little black dress.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures 18" long. For a necklace that is longer or shorter, simply adjust the beaded wire length.
  1. Before you begin, please watch the video on How to Use Austrian Crystal Fancy Stone Settings.
  2. Following what you learned in the video, place your 30x20 Austrian crystal crystal pear fancy stone into its fancy stone setting. Set aside.
  3. Using your flush cutters, cut a length of beading wire that is 24 inches long. I have already included 3" on either side to allow for crimping.
  4. Onto your wire, string on a crimp tube followed by the loop on one half of your metallic clap. Take the wire back through the crimp tube. Pull snug and crimp using your crimping pliers. Snip off any excess wire using your flush cutters.
  5. Onto your wire, string on the following: two O-beads and one bicone. Repeat this pattern 24 times followed by 2 more O-beads.
  6. Next, string on one 12x6 Jet Swarovksi double spike followed by two O-rings. Repeat this pattern 7 more times, followed by one 12x6 Crystal Silver Night double spike, one 12x6 Jet double spike, and two 16X8 Crystal Night Shade double spikes. String on your Austrian crystal pear fancy stone with setting, making sure to string your wire through the top two holes in the setting. See photo for assistance.
  7. Repeat the same pattern of beads onto the second half of your necklace the same way you did the first. Remember to use a bead stopper at any point to keep your beads from falling off.
  8. Once all your beads are one, slide on another crimp tube and take the wire through the loop on the second half of your magnetic clasp. Bring the wire back through the crimp tube and pull snug. Crimp your crimp tube. Snip off any excess wire using your flush cutters.
  9. Close the clasp and you're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-67533 - Beadalon Wire Satin Silver 7 Strand .015 Inch / 30Ft
    Project uses 24 inches. You will need 1 package.

  • BCO-001 - Czech Glass Flattened O Beads, 3.8x1mm, 8 Gram Tube, Crystal Labrador
    Project uses 1 tube. You will need 1 package.

  • SWCR-5011 - Austrian Crystal, 5747 Double Spike Beads 12x6mm, 2 Pieces, Jet
    Project uses 20 pieces. You will need 10 packages.

  • FCR-1216 - Beadalon Silver Plated Crimp Tubes 1.5mm (68 Beads)
    Project uses 2 pieces. You will need 1 package.

  • FCL-6810 - Beadsmith Silver Plated Magnetic Barrel Clasps 11x5mm (4 Sets)
    Project uses 1 set. You will need 1 package.

  • SWCR-5022 - Austrian Crystal, 5747 Double Spike Bead 16x8mm, 1 Piece, Crystal Silver Night 2x
    Project uses 4 pieces. You will need 4 packages.

  • SWCR-5010 - Austrian Crystal, 5747 Double Spike Beads 12x6mm, 2 Pieces, Crystal Silver Night 2x
    Project uses 4 pieces. You will need 2 packages.

  • SWBB-13998 - Austrian Crystal, 5328 Bicone Beads 3mm, 25 Pieces, Crystal Silver Night
    Project uses 50 pieces. You will need 2 packages.

  • SWCR-4195 - Austrian Crystal, 4327 Pear Fancy Stone 30x20mm, 1 Piece, Jet
    Project uses 1 piece. You will need 1 package.

  • SWCR-9920 - Austrian Crystal Fancy Stone Setting, Fits 4320 30x20mm Pear, 1 Piece, Rhodium Plated
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
Additional Information
Theme Special Occasion, Halloween
Ingredients XCR-67533, BCO-001, FCL-6810,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Beadalon Wire
You will need 1 package(s).
1 package = 1 Spool.
$4.79 / Package | SKU: XCR-67533
Czech Glass Flattened O Beads, 3.8x1mm, Crystal Labrador (8 Gram Tube)
You will need 1 package(s).
1 package = 1 Tube.
$5.89 / Package | SKU: BCO-001
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-6810
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed