Retired - Metallic Dreams Bracelet

PROJECT B3052
Designer: Karlin Jones
Skill Level: Beginner
This glamorous bracelet features a shimmery metallic gold bead mix link chain and gold plated findings. It is quite simple to make, yet looks straight out of the boutique.
Instructions
Before you begin, measure your wrist and decide how long you'd like your bracelet to be. The clasp will add about an inch to your bracelet length. These instructions will make a finished bracelet that is approximately 7" long, including the clasp. You will need a ruler for this project.
  1. Begin by measuring one 6.5" length of chain. (Keep in mind that the links in this chain slightly differ in size but once the chains lie flat next to one another, the beads will line up.)
  2. At the 6.5" mark, using your chain nose pliers, open the last link on your chain length, (how you would a jump ring). Remove the excess chain and set aside.
  3. Repeat this step 4 more times, so you have 5 lengths of chain total. Since the beads on this chain are different sizes, you may need to move one or two beads down from the end of the chain to get the measurement that you want. Just remove any extra beads.
  4. With your pliers, open up a jump ring and slide it onto the last link of one side of your chain length, but do not close it yet.
  5. Also link the same jump ring onto the first loop on one half of your tube clasp. Close the jump ring.
  6. Repeat this step on the other side of your chain; open and add another jump ring, attaching it to the top loop on the other half of your tube clasp and close.
  7. Repeat this whole process with the rest of your chain lengths, one by one attaching the last link onto an open jump ring and the loop from one side of your tube clasp. Repeat the same process on the other side as well, making sure the sides match. Close the jump rings.
  8. Once all your chain lengths are attached, close your clasp and enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHX-99944 - Czech Fire Polished Glass Metallic Gold Bead Mix On Black Link Chain 3-8mm - By The Inch
    Project uses 33 inches. You will need 33 packages.

  • FCL-5507 - 22K Gold Plated Tube Clasp 31mm Five Rings Strands (2)
    Project uses 1 set. You will need 1 package.

  • FJR-5240 - 22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
    Project uses 10 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Ingredients CHX-99944, FCL-5507, FJR-5240,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Slide Tube Clasp, 5 Rings Strands 31mm, 2 Clasps, 22K Gold Plated
You will need 1 package(s).
1 package = 2 Pieces.
$6.19 / Package | SKU: FCL-5507
22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
You will need 1 package(s).
1 package = 100 Pieces.
$2.89 / Package | SKU: FJR-5240
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Beadsmith Jewelry Fine Round Nose Micro Pliers
$7.49 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed