By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
- Use a pair of chain nose pliers to bend the top scallop on an antique silver plated oval bezel cup out until it sits flat, angling straight up.
- Place a dab of E6000 glue on the back of a light amethyst striped glass cabochon and press it into place in the bezel cup. Allow the glue to dry thoroughly before continuing.
- Place a Czech glass light pink and blue bead onto a silver plated 2", 21 gauge eye pin and create a simple wire loop after the bead. Use pliers to bend the top and bottom loops perpendicular to each other.
- Open one of the loops on the bead and hang the bezel cup by the bent scallop. Close the loop.
- Open the loop on an antique silver plated bali style teardrop earring hook and hang the bead by the free loop. Close the loop.
WHAT YOU'LL NEED: (scroll down for purchase options)
- SPCB-327 - Clear W/ Lt Amethyst Stripes Glass Cabochons 18x13mm Oval (1)
Project uses 2 pieces. You will need 2 packages.
- PND-6759 - Nunn Design Antiqued Silver Plated Oval Bezel Cup Pendant Lace Edge 18x13mm x2
Project uses 2 pieces. You will need 1 package.
- BCP-78215 - Czech Glass Druk Round Beads 8mm 2-Tone Light Pink/Blue (25)
Project uses 2 pieces. You will need 1 package.
- FHP-6261 - Silver Plated Open Eye Pins 21 Gauge 2 Inch (x50)
Project uses 2 pieces. You will need 1 package.
- FEA-8572 - Antiqued Silver Plated Earring Hooks Ear Wires With Bali Style Teardrop Detail (5 Pairs)
Project uses 2 pieces. You will need 1 package.
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 tube. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose