Retired - Marianne Ring in Aqua

PROJECT R1024
Designer: Megan Milliken
Skill Level: Beginner
This cute cocktail ring has a definite vintage vibe, with an acrylic faux pearl cabochon framed by opaque white cup chain.
Instructions
  1. Cut a length of cup chain 20 links (just under 4 inches) long. Be sure to actually count the links, this is precisely the number that will fit on your cabochon.
  2. Run a line line of E6000 glue around the edge of an aqua pearlized cabochon. You want your glue line to be just on the edge of the front side, not too far in, but not going onto the flat backside at all either.
  3. Place the cabochon down onto a flat surface that you don't mind getting glue on (I placed it on top of the plastic baggie that the cabochons came in).
  4. While the glue is still wet, place the cup chain around the edge of the cabochon, matching the ends together and then condensing the chain links down until they all meet. Refer to the photo for placement details.
  5. Allow the glue to dry before continuing.
  6. Flip your cabochon over. Place a dab of glue onto the glue pad on a gold plated ring base and press the ring base onto the back of the cabochon. Make sure it is centered and allow to dry.
  7. Allow all glue to dry thoroughly before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BPL-2036 - Acrylic Faux Pearl Flatback Cabochons 20mm - Pearlized Aqua (6)
    Project uses 1 piece. You will need 1 package.

  • CHA-10140 -
    Project uses 4 inches. You will need 1 package.

  • JR-1057 - 22K Gold Plated Adjustable Ring With 16mm Pad For Gluing (4)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Vintage Look
Ingredients BPL-2036, CHA-10140, JR-1057, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$1.49 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed