Retired - Make A Wish Necklace

PROJECT N688
Designer: Julie Bean
Skill Level: Advanced
A pretty fairy with her star wand graces the front of the Green Girl Studios bead used as the focal point of this necklace. The open-back bezel allows for light to shine through, highlighting the berry colored beads surrounding the fairy, and also letting us see the word 'wish' on the backside.
Instructions
  1. To see how to make the focal pendant for this necklace, please watch the video on How to Fill an Open-Back Bezel with Resin. If you are not familiar with how to use Ice Resin in general, you can view the video: How to Use Ice Resin.
  2. Make the focal pendant according to the instructions in the video, paying close attention to the orientation of the bezel and the Green Girl Studios focal bead when you pour your second layer of resin (see photo). You will need to do two resin pours for this necklace, I recommend having several other projects handy so that you can mix 1oz of resin for each pour (and use the leftover for your other projects).
  3. After your focal pendant is completely cured, cut your 2 feet of chain into two 12" sections.
  4. Open a jump ring and link it to one of the side rings on the pendant. Close the jump ring. On the other side of the chain, open another jump ring and link it to the Nunn Design round toggle clasp. Close the jump ring.
  5. Repeat the previous step but this time attach the Nunn Design fern toggle clasp bar to the end.
  6. Enjoy your pretty new necklace!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-3497 - Nunn Design Antiqued Copper Plated Open Bezel Pendant Link 30mm - 1
    Project uses 1 piece. You will need 1 package.

  • CHA-9672 - Antiqued Copper Plated Cable Chain 3.4mm Bulk By The Foot
    Project uses 2 feet. You will need 2 packages.

  • TRC-12 - Ice Resin Epoxy, Jewelers Grade Clear Casting Kit, 1 Ounce
    Project uses 1 package. You will need 1 package.

  • FCL-7511 - Nunn Design Copper Plated Pewter Round Toggle Clasp Ring 18.5mm (1)
    Project uses 1 piece. You will need 1 package.

  • FCL-7216 - Nunn Design Antiqued Copper Plated Fern Toggle Clasp Bar 20mm
    Project uses 1 piece. You will need 1 package.

  • BCS-1892 - Czech Seed Beads 11/0 Mix Very Very Berry Purple Red
    Project uses 1 hank. You will need 1 package.

  • FJR-3086 - Antiqued Copper Plated Open Jump Rings 4mm 21 Gauge (50)
    Project uses 4 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-0300 - Jeweller's Micro-Flame Butane Torch Self Igniting Refillable 6 Inch
Additional Information
Ingredients FCO-3497, CHA-9672, TRC-12, FCL-7511, FCL-7216, BCS-1892, FJR-3086,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Ice Resin Epoxy, Jewelers Grade Clear Casting Kit, 1 Ounce
You will need 1 package(s).
1 package = 1 Kit.
$18.89 / Package | SKU: TRC-12
Antiqued Copper Plated Open Jump Rings 4mm 21 Gauge (50)
You will need 1 package(s).
1 package = 50 Pieces.
$0.73 / Package | SKU: FJR-3086
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed