Retired - Lucky Girl Bracelet

Name: Retired - Lucky Girl Bracelet
Brand: Beadaholique
SKU: B2336
Availability: OutOfStock

PROJECT B2336

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

This triple strand leather bracelet features a trio of lucky talismans from TierraCast's Happy Go Lucky Collection.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This bracelet measures approximately 6.5 inches. To modify the length, simply adjust the length of leather used respectively.

Begin by opening one 4x6mm oval jump ring and slip on the evil eye charm. Close the jump ring. Set this aside.
Cut three lengths of leather 5.5 inches each.
Onto one end of each cord, add slip on crimp cord end and using a chain nose pliers pinch the center of the cord end. Now you should have all three cords with one end exposed and one end crimped.
Take one cord and string on one noodle bead, the cat charm, and one noodle bead. Add another crimp cord end to the end.
Take the second cord and string on one tube spacer bead, the jump ring attached to the evil eye charm, and one tube spacer bead. Add another crimp cord end to the end.
Take another cord and string on one noodle bead, the Ganesh charm, and one noodle bead. Add another crimp cord end to the end.
Gather all three cord ends on one side, making sure the charms are all facing the same way, and open one 5x8mm oval jump ring. Link the loops of the cord ends together with this jump ring. I recommend putting the strand with the evil eye charm in the middle. Close the jump ring. Repeat this on the other side.
Finally, open one 4x6mm oval jump ring and attach it to the oval jump ring you just added and to one end of the toggle clasp. Move to the other side of the bracelet and repeat to add the second half of the toggle clasp.

WHAT YOU'LL NEED: (scroll down for purchase options)

PNT-013 - TierraCast Pewter Charm, Ganesh Elephant 18mm, 1 Piece, Antiqued Gold Plated
Project uses 1 piece. You will need 1 package.

PNT-016 - TierraCast Pewter Charm, Beckoning Kitty Cat with Loop 17mm, 1 Piece, Antiqued Gold Plated
Project uses 1 piece. You will need 1 package.

PNT-029 - TierraCast Pewter Charm, Evil Eye with Metallic Blue Crystal 15mm, 1 Piece, Antiqued Gold Plated
Project uses 1 piece. You will need 1 package.

BMB-922 - TierraCast Spacer Bead, Tube with Decorative Edges 6x15mm, 2 Pieces, Antiqued Gold Plated
Project uses 2 pieces. You will need 1 package.

BMB-4071 - 22K Gold Plated Curved Noodle Beads 3mm x 22mm (20)
Project uses 4 pieces. You will need 1 package.

FCR-3155 - Cord Ends, Fancy Crimp Style with Loop, Fits 1.5mm Cord, 10 Pieces, Gold Tone Brass
Project uses 6 pieces. You will need 1 package.

FCL-7135 - TierraCast 22K Gold Plated Lead-Free Pewter 5/8 Inch Anna's Toggle Clasp (1)
Project uses 1 piece. You will need 1 package.

CHY-1512 - Genuine Leather Cord, Round 1.5mm, By the Yard, Natural Red
Project uses 16.5 Inches. You will need 1 package.

FJR-3917 - 22K Gold Plated Open Jump Rings Oval 5x8mm 21 Gauge (50)
Project uses 2 pieces. You will need 1 package.

FJR-3916 - 22K Gold Plated Open Jump Rings Oval 4x6mm 20 Gauge (50)
Project uses 3 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Theme	Yoga, Boho
Ingredients	PNT-013, PNT-016, PNT-029, BMB-922, BMB-4071, FCL-7135, CHY-1512, FJR-3917, FJR-3916,

Useful Techniques & Learning Guides

How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: PNT-013

            
You will need 1 package(s).
1 package = .

             / Package | SKU: PNT-016

            
You will need 1 package(s).
1 package = .

             / Package | SKU: PNT-029

            
You will need 1 package(s).
1 package = .

             / Package | SKU: BMB-922

22K Gold Plated Curved Noodle Beads 3mm x 22mm (20 pcs)

            22K Gold Plated Curved Noodle Beads 3mm x 22mm (20 pcs)
        
You will need 1 package(s).
1 package = 20 Pieces.

                $6.39
            
             / Package | SKU: BMB-4071

Sold out

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FCL-7135

Leather Cord, Round 1.5mm, Natural Red, by Leather Cord USA (1 yard)

            Leather Cord, Round 1.5mm, Natural Red, by Leather Cord USA (1 yard)
        
You will need 1 package(s).
1 package = 1 Yard.

                $2.25
            
             / Package | SKU: CHY-1512

22K Gold Plated Open Jump Rings Oval 5x8mm 21 Gauge (50 pcs)

            22K Gold Plated Open Jump Rings Oval 5x8mm 21 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $2.39
            
             / Package | SKU: FJR-3917

Sold out

22K Gold Plated Open Jump Rings Oval 4x6mm 20 Gauge (50 pcs)

            22K Gold Plated Open Jump Rings Oval 4x6mm 20 Gauge (50 pcs)
        
You will need 1 package(s).
1 package = 50 Pieces.

                $4.87
            
             / Package | SKU: FJR-3916