Retired - Love Me Always Bracelet

PROJECT B697
Designer: Julie Bean
Skill Level: Intermediate
This bracelet is sweet, romantic, and quite utterly charming to boot. Silver plated bow stampings have been interspersed with prong set Czech glass chatons in a pale pink hue and then capped off with an arrow and heart toggle clasp.
Instructions
The instructions below will make an approximately 7 inch bracelet (just a little smaller). However, if you want to make it larger, there are plenty of leftover supplies included in the project ingredients for you to expand the length of the bracelet.
  1. Start by watching the video: How to Use Nunn Design Prong Settings for Chatons.How to Use Nunn Design Prong Settings for Chatons.
  2. Based upon what you learned in the video, place 6 Czech Glass table cut oval chatons into 6 Nunn Design prong settings.
  3. Starting with a prong set chaton and using jump rings, link together 6 chatons and 5 bows, alternating chaton, bow, chaton, bow, etc. until you end with a chaton on each end.
  4. Open another jump ring and link it to an end chaton and also the heart part of your toggle clasp. Close the jump ring.
  5. On the other side of your bracelet, open and connect a jump ring. Close this jump ring. Open, connect, and close another jump ring to the one you just attached. Open and connect a third jump ring to the second one you attached and also link onto this jump ring the arrow part of your toggle clasp. Close the jump ring.
  6. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FJR-3092 - Antiqued Silver Plated Open Jump Rings 4mm 21 Gauge (50)
    Project uses 14 pieces. You will need 1 package.

  • FCO-9809 - Antiqued Silver Plated Bow Connector Stamping 15x8.5mm (4)
    Project uses 5 pieces. You will need 2 packages.

  • BCP-10732 - Czech Glass Table Cut - Oval Chatons Pointed Foiled Back Rosaline 10x8mm (4)
    Project uses 6 pieces. You will need 2 packages.

  • FCO-3562 - Nunn Design Antiqued Silver Plated Oval Four-Prong Setting 8x10mm (4)
    Project uses 6 pieces. You will need 2 packages.

  • FCL-7090 - TierraCast Silver Plated Pewter Scroll Heart & Arrow Toggle Clasp 11mm (1)
    Project uses 1 clasp. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Valentine's Day, Mother's Day
Ingredients FJR-3092, FCO-9809, BCP-10732, FCO-3562, FCL-7090,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Silver Plated Open Jump Rings 4mm 21 Gauge (50)
You will need 1 package(s).
1 package = 50 Pieces.
$1.49 / Package | SKU: FJR-3092
Antiqued Silver Plated Bow Connector Stamping 15x8.5mm (4)
You will need 2 package(s).
1 package = 4 Pieces.
$2.69 / Package | SKU: FCO-9809
Czech Glass Table Cut - Oval Chatons Pointed Foiled Back Rosaline 10x8mm (4)
You will need 2 package(s).
1 package = 4 Pieces.
$1.65 / Package | SKU: BCP-10732

Tools and Other Supplies:

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

You recently viewed

Clear recently viewed