Retired - Infinite Night Necklace

PROJECT N2084
Designer: Kat Silvia
Skill Level: Beginner
Fall into the infinite night with this Swarovski Crystal necklace featuring a delicate infinity pendant.
Instructions
These instructions will give you a necklace that is approximately 19 Inches. To adjust the length simply modify the length of chain on each side respectively.
  1. Begin by cutting two lengths of chain 10 inches each. When you cut the chain, you should have one ball link with both jump rings attached at the beginning of the chain and at the other end cut off the last link before the ball so you have a length of chain without the ball. You will need both lengths of chain to be the same.
  2. Take one length of chain with the chain at the end (not the ball), and string it through the opening on one side of the infinity link.
  3. Open one jump ring and attach the end of this chain to the jump ring attached to the adjacent ball link of this chain. Close the jump ring. Repeat the above two steps on the other side of the infinity link.
  4. Move to the end of the chain and open one jump ring. Attach it to the last jump ring in the chain. Close the jump ring.
  5. Move to the other end of the chain and open one jump ring. Attach it to the last jump ring in the chain and to one lobster clasp. Close the jump ring.
  6. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-0451 - Gun Metal Plated Bulk Chain, Fine 2x1.5mm Cable Links with 2mm Ball, Sold By The Foot
    Project uses 20 Inches. You will need 2 packages.

  • SWCR-6250 - Swarovski Crystal, 6792 Infinity Pendant 18mm, 1 Piece, Crystal Metallic Lt Gold 2X
    Project uses 1 piece. You will need 1 package.

  • FJR-5453 - Gun Metal Plated Open Jump Rings 4mm 22 Gauge (50)
    Project uses 4 pieces. You will need 1 package.

  • FCL-2415 - Gun Metal Plated Curved Lobster Clasps 12mm (6)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Ingredients CHA-0451, SWCR-6250, FJR-5453, FCL-2415,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Gun Metal Plated Open Jump Rings 4mm 22 Gauge (50)
You will need 1 package(s).
1 package = 50 Pieces.
$2.99 / Package | SKU: FJR-5453
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$8.39 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed