Retired - Gothic Girl Bracelet

PROJECT B2073
Designer: Kat Silvia
Skill Level: Beginner

This dark but feminine bracelet features the Austrian crystal Cross in Jet, surrounded by Austrian crystal Baroque Light Grey Pearls.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a bracelet that is 6 3/4". To adjust the length, simply add or subtract the number of beads used in this pattern. The size of the clasp (from crimp cover to crimp cover) is 1 1/4".
  1. Cut off a 12" piece of beading wire. Place a bead stopper 3" from one end.
  2. String on one Jet round crystal, three light grey pearls, one Jet round crystal, three light grey pearls, one Jet round crystal, three light grey pearls, one crystal cross, three light grey pearls, one Jet round crystal, three light grey pearls, one Jet round crystal, three light grey pearls, and one Jet round crystal.
  3. String on one crimp tube. Take the beading wire and go through one closed jump ring and thread the wire back down through the crimp tube. Pull the crimp tube snug to the jump ring. Crimp the crimp tube with the Xuron 4 in 1 Crimping Pliers.
  4. Thread the wire back through a few beads and trim the wire.
  5. Use a crimp cover to cover the crimped tube. Place the cover over the tube and close the opening with your pliers.
  6. Move to the other side of the bracelet and remove the bead stopper.
  7. String on one crimp tube. Take the beading wire and go through one closed jump ring and thread the wire back down through the crimp tube. Pull the crimp tube snug to the jump ring so that there is no slack on the bracelet. Crimp the crimp tube.
  8. Thread the wire back through a few beads and trim the wire.
  9. Use a crimp cover to cover the crimped tube. Place the cover over the tube and close the opening with your pliers.
  10. Open one jump ring and attach it to one of the closed jump rings as well as the loop of a lobster clasp. Close the jump ring.
  11. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWCR-5067 - Austrian Crystal, 5378 Cross Bead 18mm, 1 Piece, Jet
    Project uses 1 piece. You will need 1 package.

  • SWC-0415 - Austrian Crystal, 5000 Round Beads 4mm, 12 Pieces, Jet
    Project uses 6 pieces. You will need 1 package.

  • SWP-9661 - Austrian Crystal, 5840 Baroque Faux Pearl Beads 6mm, 25 Pieces, Light Grey
    Project uses 18 pieces. You will need 1 package.

  • FCL-2415 - Gun Metal Plated Curved Lobster Clasps 12mm (6)
    Project uses 1 piece. You will need 1 package.

  • FJR-5296 - Gun Metal Plated Open Jump Rings 6mm 19 Gauge (100)
    Project uses 1 piece. You will need 1 package.

  • FJR-4052 - Gun Metal Plated Closed Jump Rings 6mm 19 Gauge (20)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1083 - Gun Metal Brass Fluted Crimp Bead Covers 4mm (144)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1257 - Beadsmith Black Ox / Gunmetal Crimp Tube Beads 1.5x1.5mm (100)
    Project uses 2 pieces. You will need 1 package.

  • XCR-5143 - Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, 30 Feet, Satin Silver
    Project uses 12 inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
Additional Information
Theme Christian Faith
Ingredients SWCR-5067, SWC-0415, SWP-9661, FCL-2415, FJR-5296, FJR-4052, FCR-1083, FCR-1257, XCR-5143,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Gun Metal Plated Open Jump Rings 6mm 19 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$4.59 / Package | SKU: FJR-5296
Crimp Bead Covers, Fluted 4mm, Gunmetal Plated (144 Pieces)
You will need 1 package(s).
1 package = 144 Pieces.
$7.45 / Package | SKU: FCR-1083
The Beadsmith Crimp Beads, 1.5x1.5mm, Black Ox / Gunmetal (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$1.99 / Package | SKU: FCR-1257
Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, Satin Silver (30 Feet)
You will need 1 package(s).
1 package = 1 Spool.
$14.69 / Package | SKU: XCR-5143
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$8.49 / Package | SKU: XTL-5514
Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed