Retired - Fringed Leaves Necklace

PROJECT N2098
Designer: Kat Silvia
Skill Level: Advanced
This necklace features cut out leaves from Create Recklessly Faux Leather in a fringed pendant focal piece.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Please watch our video: How to Cut Create Recklessly Faux Leather into Shapes. Take the strip of pewter grey faux leather and cut out a triangle approximately 3 1/2 x 2 1/2 x 2 1/2. Trace this shape on to the grey ultra suede. Cut out the shape. Set both aside.
  2. Cut about 18 leaves out of the green faux leather.
  3. Use the Rotating Leather Hole Punch, and punch holes with the 2mm holes near one side of the leaves.
  4. For this next step please watch our video: How to Set Cap Rivets in Faux Leather. You will now attach each of the leaves with the cap compression rivets to the grey triangle. You will be adding two or three leaves to each of the rivets. For my example, I used 9 rivets for my 18 leaves. This is an area for you to customize your necklace. Also once you have decided where you are going to place your rivets on the triangle, you will need to punch holes in the grey leather as well, but not the grey ultra suede.
  5. Once you have added all of the leaves, Use a dab of crafter's pick to attach the ultra suede to the back of this triangle to cover up all the rivets. Let dry.
  6. Take the rotary hole punch again, this time using the 3mm punch on the two top corners of the triangle.
  7. Set the eyelets into these two holes using the eyelet setting tool from the tool kit.
  8. Take the 2 feet length of chain and open the link of one end and pinch it around the eyelet on one side of the triangle. Repeat on the other side of the necklace with the other end of the chain.
  9. As a final touch, snip the leaves twice on each side to give it a fringed look. Please see photo for reference.
  10. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-1331 - Create Recklessly, Symphony Faux Leather 10 x 2 Inch Strip, 1 Piece, Pewter Grey
    Project uses 1 piece. You will need 1 package.

  • XCR-1336 - Create Recklessly, Symphony Faux Leather 10 x 2 Inch Strip, 1 Piece, Scallion Green
    Project uses 2 pieces. You will need 2 packages.

  • FCO-1625 - Create Recklessly, Cap / Post Compression Rivets 6mm, 12 Pieces, Gun Metal Plated
    Project uses 9 pieces. You will need 1 package.

  • FCO-1635 - Create Recklessly, Hollow Eyelets 3/16, 36 Pieces, Gun Metal Plated
    Project uses 2 pieces. You will need 1 package.

  • CHA-9691 - Gunmetal Steel Long Link Chain 5mm x 13mm Bulk By The Foot
    Project uses 2 Feet. You will need 2 packages.

  • XCR-4373 - Beadsmith Ultra Suede For Beading Foundation And Cabochon Work 8.5x4.25 In. - Silver Pearl
    Project uses 1 piece. You will need 1 package.

  • XTL-1026 - Crafter's Pick The Ultimate Permanent Glue Cement Adhesive 4 OZ
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-0813 - Create Recklessly, Deluxe Interchangeable Tool Kit for Cold Connections, 17 Heads
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
  • XTL-0812 - Create Recklessly, Poly Punching Cutting & Tooling Board with Ruler
  • XTL-0277 - ImpressArt Brass Hammer For Metal Stamping - 1 Pound - 1 Piece
  • XTL-5502 - BeadSmith Rotating Leather Hole Punch Tool - Creates 6 Hole Sizes!
  • XTL-0036 - Wubbers Classic Series Bent Chain Nose Quality Jeweller's Pliers
Additional Information
Theme Summer
Ingredients XCR-4373, XTL-1026,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
The Beadsmith Ultra Suede For Beading Foundation And Cabochon Work 8.5x4.25 In. - Silver Pearl
You will need 1 package(s).
1 package = 1 Tube.
$5.85 / Package | SKU: XCR-4373
Crafter's Pick The Ultimate Permanent Glue Cement Adhesive 4 OZ
You will need 1 package(s).
1 package = 4 oz..
$8.75 / Package | SKU: XTL-1026
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

/ Package | SKU: XTL-5700
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020
ImpressArt Brass Hammer For Metal Stamping - 1 Pound - 1 Piece

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed