Retired - Forever In Blue Jeans Bracelet

PROJECT B163
Designer: Andrea Morici
Skill Level: Beginner
Beadaholique is proud to participate in the 7,000 Bracelets For Hope campaign, in which the Global Genes Project will be collecting denim-themed bracelets to donate to families of children who are suffering from
Instructions
  1. Use a sharp pair of scissors to cut the strand of silk ribbon into seventeen pieces of equal length (approximately two and a half inches long each). Set these aside.
  2. Using your flush cutters, cut a piece of beading wire that is approximately one foot long. Secure one end of the wire with a Bead Stopper.
  3. Onto the strand, thread an 8mm denim lapis bead. Directly next to that bead, tie a piece of silk around the beading wire into a double overhand knot.
  4. Repeat the previous step until you have seventeen denim lapis beads with a silk knot in between each.
  5. At the very end of the strand, thread five* assorted blue 8/0 seed beads. (*The overall length of the bracelet is just under eight inches. If you would like a longer or shorter finished product, add or omit seed beads during this step.)
  6. Add a crimp tube to the end of the strand, but do not crimp it yet. Thread the end of the strand through the loop on the bar half of the toggle clasp, and back through the crimp tube and several consecutive beads. Pull the wire snug, leaving enough wiggle room for the clasp, and crimp the tube.
  7. Remove the Bead Stopper from the other end of the bracelet and repeat the previous step using the round half of the toggle clasp. Trim excess wire from both ends of the bracelet.
  8. Finally, add a fluted gunmetal crimp bead cover over each of the crimps and gently squeeze closed.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SPLL-28 - Denim Lapis Lazuli Round Beads 8mm / 16 In. Strand
    Project uses 17 pieces. You will need 1 package.

  • XCR-46096 - Silk Fabric String, 2mm Diameter, 42 Inches Long, 1 Strand, Dusty Blue Grey - Discontinued Color
    Project uses 1 piece. You will need 1 package.

  • FCL-7702 - TierraCast Black Finish Pewter Scroll 'Classic' Toggle Clasp 12.5mm (1)
    Project uses 1 piece. You will need 1 package.

  • FCR-1083 - Gun Metal Brass Fluted Crimp Bead Covers 4mm (144)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1257 - Beadsmith Black Ox / Gunmetal Crimp Tube Beads 1.5x1.5mm (100)
    Project uses 2 pieces. You will need 1 package.

  • XCR-5593 - Soft Flex, Econoflex 7 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Steel Gray
    Project uses 1 foot. You will need 1 package.

  • BCS-8791 -
    Project uses 5 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5230 - Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps
Additional Information
Ingredients SPLL-28, XCR-46096, FCL-7702, FCR-1083, FCR-1257, XCR-5593, BCS-8791,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
TierraCast Black Finish Pewter Scroll 'Classic' Toggle Clasp 12.5mm (1)
You will need 1 package(s).
1 package = 1 Set.
$2.05 / Package | SKU: FCL-7702
Gun Metal Brass Fluted Crimp Bead Covers 4mm (144)
You will need 1 package(s).
1 package = 144 Pieces.
$5.69 / Package | SKU: FCR-1083
Beadsmith Black Ox / Gunmetal Crimp Tube Beads 1.5x1.5mm (100)
You will need 1 package(s).
1 package = 100 Pieces.
$1.99 / Package | SKU: FCR-1257
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed