Retired - Forever 1 Heart Necklace

PROJECT N218
Designer: Andrea Morici
Skill Level: Beginner
Showcasing a new style of Austrian crystal Innovations, our Forever 1 Heart Necklace is simply stunning.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Begin by cutting a piece of the small, antiqued silver rolo chain which is seventeen links long. Set this aside.
  2. Thread six silver plated headpins with a 4mm black diamond Austrian Crystal bicone each. Create a wrapped wire loop on each and trim off excess wire. Set these dangles aside.
  3. Thread six gunmetal headpins with a 4mm black diamond Austrian Crystal bicone each. Create a simple wire loop on each and trim off excess wire. Set these dangles aside with the other dangles.
  4. Open two black oval jump rings. Thread each jump ring through each end of the antiqued silver rolo chain, and close both jump rings again.
  5. Onto the black add-a-bead bar pendant, thread a antiqued silver bead cap, flat side first, and the oval jump ring at one end of your chain segment. Now, thread the bar through the hole in the large Austrian crystal heart pendant.
  6. Open the oval jump ring at the opposite end of the chain segment and thread it though the hole on the end or the bar pendant, which is now protruding from the back of the Austrian crystal heart. Close the jump ring again.
  7. Open the third oval jump ring and thread it through the middle link of the rolo chain.
  8. Thread all of your Austrian crystal bicone dangles onto the jump ring, six on one half, six on the other. Make sure to alternate the dangles on the silver headpins with the dangles on the gunmetal headpins.
  9. Finally, thread the jump ring through the last link at each end of the two foot long piece of gunmetal chain. Close the jump ring once more.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWBB-8602 - Austrian crystal Pendant, 6263 Forever 1 Heart, 36mm, 1 Piece, Crystal Satin
    Project uses 1 piece. You will need 1 package.

  • PND-7623 - TierraCast Black Finish Pewter Lead-Free 3/4 Inch Add A Bead Bar Pendant 19mm (4)
    Project uses 1 piece. You will need 1 package.

  • BMB-3525 - TierraCast Silver Plated Pewter Beaded Bead Cap 8mm x 3.5mm (4)
    Project uses 1 piece. You will need 1 package.

  • CHA-99974 - Gun Metal Long Flat Link Cable Chain 3.3x8.3mm - Bulk By The Foot
    Project uses 2 feet. You will need 2 packages.

  • CHA-9967 - Antiqued Silver Plated Round Rolo Chain 3mm Bulk By The Foot
    Project uses 1 foot. You will need 1 package.

  • FHP-5420 - Silver Plated Head Pins 2 Inches 24 Gauge (X50)
    Project uses 6 pieces. You will need 1 package.

  • FHP-5421 - Gun Metal Head Pins 2 Inches 24 Gauge (X50)
    Project uses 6 pieces. You will need 1 package.

  • FJR-6000 - TierraCast Black Finish Brass Open Oval Jump Rings 6mm 20 Gauge (50)
    Project uses 3 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Valentine's Day
Ingredients CHA-9967, FHP-5420, FJR-6000,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Silver Plated Rolo Chain, 3mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$3.47 / Package | SKU: CHA-9967
Head Pins, 2 Inches Long and 24 Gauge Thick, Silver Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$2.39 / Package | SKU: FHP-5420
TierraCast Black Finish Brass Open Oval Jump Rings 6mm 20 Gauge (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.29 / Package | SKU: FJR-6000
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed