Retired - Flower Power Necklace in September Sunset

PROJECT N723
Designer: Julie Bean
Skill Level: Intermediate
Vibrant and bold, the Flower Power necklace uses strong graphic shapes and bright colors to bring attention to its riveted design. The combination of purple and yellow patinas on the flower stampings is reminiscent of a warmly hued sunset in September.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Please note that you will also need a paint brush and pen for this project.
  1. Paint your 19mm Vintaj petal stamping using Vintaj patina in purple opalite. Paint your 34mm Vintaj petal stamping using Vintaj patina in yellow ochre. Let both of these stampings dry and then paint a second coat of patina on each. Let dry.
  2. Please watch the video: How to Use Beadsmith's EZ-Rivet Tool.
  3. Based upon what you learned in the video, rivet your two petal stampings to a Vintaj Artisan Copper 35mm round stamping blank using a 1/8" hollow rivet.
  4. Open a 4mm jump ring and connect this to the hole at the top of your copper stamping blank from the previous step. Close the jump ring.
  5. Cut an 18 inch length of antique copper plated textured cable chain.
  6. Thread one end of the cut chain through the jump ring attached to your pendant.
  7. Open a 6mm antique copper plated jump ring and link this to one end of your chain. Close the jump ring.
  8. Open a 4mm jump ring and link this to the other end of your chain. Also place onto the jump ring your small lobster clasp. Close the jump ring.
  9. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9653 - Antiqued Copper Plated Textured Cable Chain 2.3mm Bulk By The Foot
    Project uses 18 inches. You will need 2 packages.

  • FJR-3086 - Antiqued Copper Plated Open Jump Rings 4mm 21 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • FCL-2526 - Antiqued Copper Plated Sleek Lobster Claw Clasps 10mm (6)
    Project uses 1 clasp. You will need 1 package.

  • PND-7464 - Vintaj Artisan Copper Blank Circle Blank Pendant 35mm (2)
    Project uses 1 piece. You will need 1 package.

  • PND-7132 - Vintaj Natural Brass 6 Petal Cut Out Flower Stamping Findings 19mm (2)
    Project uses 1 piece. You will need 1 package.

  • PND-7133 - Vintaj Natural Brass 8 Petal Cut Out Flower Stamping Findings 34mm (2)
    Project uses 1 piece. You will need 1 package.

  • FJR-3093 - Antiqued Copper Plated Open Jump Rings 6mm 20 Gauge (50)
    Project uses 1 piece. You will need 1 package.

  • FCO-9915 - Beadsmith Metal Elements Copper 1/8 Inch Hollow Rivets 1/16 Inch Diameter (100)
    Project uses 1 piece. You will need 1 package.

  • XTL-9069 - Vintaj Patina Opaque Permanent Ink - Purple Opalite - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

  • XTL-9068 - Vintaj Patina Opaque Permanent Ink - Yellow Ochre - 0.5 Ounce Bottle
    Project uses 1 bottle. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-0094 - Beadsmith EZ-Rivet Piercing And Setting Tool - 1/16 Set (1 Tool)
Additional Information
Theme Spring
Ingredients CHA-9653, PND-7464, FJR-3093,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Antiqued Copper Plated Textured Cable Chain, 2.3mm, by the Foot
You will need 2 package(s).
1 package = By The Foot.
$2.95 / Package | SKU: CHA-9653
Vintaj Artisan Copper Blank Circle Blank Pendant 35mm (2 pcs)
You will need 1 package(s).
1 package = 2 Pieces.
$4.49 / Package | SKU: PND-7464
Antiqued Copper Plated Open Jump Rings 6mm 20 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$1.79 / Package | SKU: FJR-3093
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed