Click or scroll to zoom
Tap or pinch to zoom
Retired - Fleur de Lis Bracelet
Click or scroll to zoom
Tap or pinch to zoom
Retired - Fleur de Lis Bracelet
Retired - Fleur de Lis Bracelet

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Fleur de Lis Bracelet

PROJECT B600
Designer: Julie Bean
Skill Level: Advanced
From the blue and white toile looking backing to the silver fleur de lis', this bracelet is oh so very French. Imagine walking along the Avenue de Champs d'Elysse or strolling the right bank while wearing this
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. To begin this project, take your pre-made bracelet and place a piece of scrap paper on top of one of the 18mm circle sections. holding the bracelet and the circle between your thumb and index finger, press them together so that you make an imprint of the circle on the paper. Cut out the circle. Use this circle as a template to trace around on the backside of your blue and white paper. Trace and cut out 5 circles, if you need to cut them down slightly to fit into you bracelet settings, do so at this time.
  2. Take one cut-out blue and white circle and spread Nunn glue on the backside. Place into one of your bracelet settings and press into place. Repeat with your other 4 circles. Let Dry. Once dry, apply a coat of Nunn Sealant over the top. Let dry.
  3. Pull out 5 fleur de lis' and cut off the charm loops at the top using your flush cutters. On the back side of each, place a dab of E6000 glue. Place each fleur de lis in the center of your bracelet settings and let dry completely.
  4. Mix and pour your resin. Remove any air bubbles with a micro torch. Wait 3 days before wearing so your resin can completely cure.
  5. C'est Fini!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • AXC-9459 - Nunn Design Antiqued Silver Tone Collage Bracelet Lrg 18mm Rounds
    Project uses 1 piece. You will need 1 package.

  • PND-5404 - Antiqued Silver Plated Fleur De Lis Charms 14mm (4)
    Project uses 5 pieces. You will need 2 packages.

  • XTL-9518 - Nunn Design Collage Sheet Green/Navy Floral For Scrapbook - Fits Patera
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients AXC-9459, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: AXC-9459
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:
/ Package | SKU: XTL-5700
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
$16.85 / Package | SKU: XTL-5600

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed