Retired - Easter Parade Bracelet

PROJECT B159
Designer: Andrea Morici
Skill Level: Beginner
This piece is perfectly playful with its parade of pastel Austrian crystal pearls shaped like Easter eggs, punctuated with a precious little bunny rabbit.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Use your Flush Cutters to cut a piece of Soft Flex beading wire at approximately ten inches long. Secure one end with a Bead Stopper.
  2. Onto your wire, thread the following:
  3. a 4mm Austrian crystal crystal AB 2x bicone
  4. an Austrian crystal teardrop rosaline pearl
  5. an Austrian crystal crystal AB rondelle
  6. an Austrian crystal teardrop light blue pearl
  7. a 4mm Austrian crystal crystal AB 2x bicone
  8. an Austrian crystal teardrop lavender pearl
  9. an Austrian crystal crystal AB rondelle
  10. an Austrian crystal teardrop crystal light gold pearl
  11. Repeat this stringing sequence two more times, and finally, add another 4mm Austrian crystal crystal AB 2x bicone.
  12. Onto the end of the strand, thread a crimp tube, but do not crimp it yet. Thread the strand through the loop on one half of the toggle clasp, back through the tube, and pull snug. Leave enough room for the toggle to move freely. Crimp the tube and trim off excess wire from this end.
  13. Remove the Bead Stopper from the opposite end of the bracelet and repeat the previous step.
  14. Remove the existing jump ring from the rabbit charm, and replace it with a 5mm jump ring. Before closing the 5mm jump ring, add it to the oval part of the toggle clasp.
  15. Place a crimp bead cover over each of the crimp tubes and gently squeeze each closed.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-5193 - Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Satin Silver
    Project uses 10 feet. You will need 1 package.

  • PND-8092 - Silver Plated With Enamel 3-D Bunny Rabbit Charm 15mm (1)
    Project uses 1 piece. You will need 1 package.

  • FCL-7060 - TierraCast Silver Plated Pewter Scroll Melody Toggle Clasp 17mm (1)
    Project uses 1 piece. You will need 1 package.

  • SWC-5031 - Austrian Crystal, 9001 Rondelle Beads 4x2mm, 2 Pieces, Silver Plate With Crystal AB
    Project uses 6 pieces. You will need 3 packages.

  • SWP-1158 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Light Gold
    Project uses 3 pieces. You will need 1 package.

  • SWP-1112 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Rosaline
    Project uses 3 pieces. You will need 1 package.

  • SWP-1131 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Light Blue
    Project uses 3 pieces. You will need 1 package.

  • SWP-1126 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, Lavender
    Project uses 3 pieces. You will need 1 package.

  • FCR-1216 - Beadalon Silver Plated Crimp Tubes 1.5mm (68 Beads)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1070 - Silver Plated Stardust Sparkle Crimp Bead Covers 4mm (144)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5230 - Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps
Additional Information
Theme Spring, Easter
Ingredients XCR-5193, PND-8092, FCL-7060, FCR-1070,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, Satin Silver (30 Feet)
You will need 1 package(s).
1 package = 1 Spool.
$19.99 / Package | SKU: XCR-5193
You will need 1 package(s).
1 package = .
/ Package | SKU: PND-8092
TierraCast Silver Plated Pewter Scroll Melody Toggle Clasp 17mm (1)
You will need 1 package(s).
1 package = 1 Set.
$2.40 / Package | SKU: FCL-7060
Crimp Bead Covers, Stardust Sparkle 4mm, Silver Plated (144 Pieces)
You will need 1 package(s).
1 package = 144 Pieces.
$12.99 / Package | SKU: FCR-1070
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed