Retired - Earthly Zen

PROJECT N2008
Designer: Kat Silvia
Skill Level: Beginner
On top of this Lapis Lazuli gemstone, lays the sterling silver Aum Om Ohm pendant. This statement piece hangs on a beautiful copper orange silk ribbon.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a necklace that is approximately 19 inches. To make it shorter or longer, adjust the ribbon length accordingly.
  1. Begin by cutting your ribbon to 22 inches. Set aside.
  2. Open the jump ring that comes on the Om pendant and remove it. Open one 10mm jump ring, place it around the pendant and around the lapis lazuli gemstone pendant, with the Om pendant in front. Close the jump ring.
  3. Now take your ribbon and thread it through the jump ring that is attaching the two pendants, so that the pendant is in the middle of the ribbon.
  4. Tie three overhand knots to secure the ribbon. On each side of the knots thread on 1 wooden bead per side.
  5. To finish the ribbon use the ribbon crimps and a dab of E6000 as demonstrated in this video.
  6. Finally, attach one jump ring to one crimp. And to the other crimp attach a jump ring and the lobster clasp.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-1194 - Sterling Silver Charm, Aum Om Ohm Symbol 20mm Round Pendant, 1 Piece, Silver
    Project uses 1 piece. You will need 1 package.

  • SPLL-41 -
    Project uses 1 piece. You will need 1 package.

  • XCR-48062 - Silk Fabric Flat Silky Ribbon, 2cm Wide, 42 Inches Long, 1 Strand, Copper Orange
    Project uses 1 piece. You will need 1 package.

  • BWD-0021 -
    Project uses 2 pieces. You will need 1 package.

  • FJR-03111 - Sterling Silver Open Jump Rings 10mm 18 Gauge Heavy (8)
    Project uses 1 piece. You will need 1 package.

  • FJR-5170 - Silver Plated Open Jump Rings 7mm 20 Gauge (x100)
    Project uses 2 pieces. You will need 1 package.

  • FCL-2534 - Silver Plated Diamond Embossed Lobster Clasps 14mm (10)
    Project uses 1 piece. You will need 1 package.

  • FCR-1420 - Silver Plated Ribbon Pinch Crimps Cord Ends 10mm or 3/8 Inch (20)
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
Additional Information
Theme Boho
Ingredients FJR-5170, FCR-1420, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Open Jump Rings 7mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$3.49 / Package | SKU: FJR-5170
Cord Ends, Ribbon Pinch Crimp 10x5.5mm, Silver Plated (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$4.39 / Package | SKU: FCR-1420
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
/ Package | SKU: XTL-5700

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed