Retired - Dearly Departed Necklace

PROJECT N3092
Designer: Karlin Jones
Skill Level: Intermediate
Luxe and mysterious, the Dearly Departed necklace will add a touch of dark glamour to your jewelry collection.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

The chain used in this project measures 24 inches. If you'd like your necklace to be longer or shorter, simply adjust your chain length.
  1. Using your chain nose pliers, open one gun metal plated jump ring and slide it onto the link at the end of one side of your 24 inch length chain and close.
  2. Repeat this step on the other end of your chain length and add on another jump ring. Before closing, also slide on the loop from your gun metal lobster clasp and close.
  3. Next, onto a gunmetal head pin slide on one gun metal corrugated bead cap, followed by your Austrian crystal skull bead and another corrugated bead cap.
  4. Then thread your head pin through the too hole on your Austrian crystal Thread Pave Bead Frame Ring. Using your round nose pliers create a wrapped wire loop and snip off any excess wire with your flush cutters.
  5. Using your chain nose pliers, open another gun metal jump ring and slide it through your wrapped wire loop and also the center point of your chain and close.
  6. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9929 - Gunmetal Plated Bar Chain 15mm Links Bulk By The Foot
    Project uses 24 inches. You will need 2 packages.

  • FHP-6318 - Gun Metal Plated Head Pins 1.5 Inches/21 Gauge (50)
    Project uses 1 piece. You will need 1 package.

  • FJR-5294 - Gun Metal Plated Open Jump Rings 4mm 21 Gauge (100)
    Project uses 3 pieces. You will need 1 package.

  • FCL-2415 - Gun Metal Plated Curved Lobster Clasps 12mm (6)
    Project uses 1 piece. You will need 1 package.

  • SWCR-9000 - Austrian Crystal, 8100102 2-Hole Thread Pave Bead Frame Ring 14.5mm, 1 Piece, Jet Hematite
    Project uses 1 piece. You will need 1 package.

  • SWBB-2006 - Austrian Crystal, 5750 Skull Bead 13mm 1 Piece, Crystal Silver Night 2X
    Project uses 1 piece. You will need 1 package.

  • BMB-7040 - Gun Metal Plated Corrugated Bead Caps - 3.5mm Diameter (100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Halloween
Ingredients FJR-5294,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-5294
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed