Retired - Daisy Shoe Clips

PROJECT C1005
Designer: Megan Milliken
Skill Level: Intermediate
Pretty antiqued silver plated daisy filigree stampings are embellished with amethyst colored glass cabochons in these shoe clips.
Instructions
Remember to double these instructions to make your matched pair of shoe clips.
  1. Use a toothpick or scrap piece of wire to spread a thin, even coat of E6000 glue onto the back of a 13 mm round amethyst foiled glass cabochon. Center it in a 13 mm antique silver plated round lace edge bezel cup and press firmly into place. Allow the glue to dry for at least an hour before moving on.
  2. Use a toothpick or scrap piece of wire to spread a thin, even coat of E6000 glue onto the back of the bezel cup. Center it over a 36 mm silver plated pimpernel flower petal filigree stamping and press firmly into place. Allow the glue to dry for at least an hour before moving on.
  3. Use a toothpick or scrap piece of wire to spread a thin, even coat of E6000 glue onto the back of the filigree stamping, being careful to apply the glue only to the filigree and not where there are holes. Press firmly onto a piece of grey ultra suede and allow to dry for at least an hour before moving on.
  4. Use a sharp pair of scissors to trim the ultra suede right along the edge of the filigree stamping.
  5. Use a toothpick or scrap piece of wire to apply a thin, even coat of E6000 glue to the glue pad on a silver plated clip on earring finding. Place the filigree piece face down and center the earring finding with the hinged edge of the earring just inside the edge of the filigree stamping. Press firmly, allow to dry for at least an hour before moving on.
  6. Use a round shape between 3/4" and 1" (such as a nickel) to trace two circles onto a spare piece of grey ultra suede with a ball point pen. Cut out the two circles.
  7. Use your finger to apply a thin, even coat of The Ultimate glue to one of the ultra suede circles. Open the clip on earring hinge and place the ultra suede circle over one side of the back of the earring finding, leaving a bit of the circle around the edges of the earring finding.
  8. Use your finger to apply a thin, even coat of The Ultimate glue to the one side of the other ultra suede circle. Line it up with the other circle and press, glue sides together, to sandwich the back of the earring finding between the to circles.
  9. Allow all of the glue to dry for at least 24 hours before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FEA-6568 - Silver Plated Clip On Earring Findings W/ 15mm Pad For Gluing (3 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • PND-5733 - Antiqued Silver Plated Pimpernel Flower Petal Filigree Stamping 36mm (1)
    Project uses 2 pieces. You will need 2 packages.

  • PND-6765 - Nunn Design Antiqued Silver Plated Round Bezel Cup Pendant Lace Edge 13mm (2)
    Project uses 2 pieces. You will need 1 package.

  • SPCB-1301 - Glass Cabochons - 13mm Round - 'Amethyst' Foiled (4 Pieces)
    Project uses 2 pieces. You will need 1 package.

  • XCR-4200 - Beadsmith Ultra Suede For Beading Foundation And Cabochon Work 8.5x8.5 Inches - Grey
    Project uses 1 piece. You will need 1 package.

  • XTL-1026 - Crafter's Pick The Ultimate Permanent Glue Cement Adhesive 4 OZ
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
Additional Information
Ingredients FEA-6568, PND-5733, PND-6765, SPCB-1301, XCR-4200, XTL-1026, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Clip On Earring Findings W/ 15mm Pad For Gluing (3 Pairs)
You will need 1 package(s).
1 package = 3 Pairs.
$3.45 / Package | SKU: FEA-6568
Beadsmith Ultra Suede For Beading Foundation And Cabochon Work 8.5x8.5 Inches - Grey
You will need 1 package(s).
1 package = 1 Piece.
$8.25 / Package | SKU: XCR-4200
Crafter's Pick The Ultimate Permanent Glue Cement Adhesive 4 OZ
You will need 1 package(s).
1 package = 4 oz..
$6.29 / Package | SKU: XTL-1026
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$1.89 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Fiskars 5 Precision Tip Scissors - Super Sharp
$6.89 / Package | SKU: XTL-5700

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed