Retired - Crystal Square Soiree Earrings

PROJECT E2030
Designer: Kat Silvia
Skill Level: Beginner
This Austrian crystal square ring fits perfectly in this connector setting to make a simple diamond shaped drop earring.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Use a scrap of wire or a toothpick to apply a dab of E6000 into the gold connector setting. Place the 14mm crystal antique pink square ring pendant into the setting. Set aside to let dry.
  2. Onto one ball head pin, place one crystal antique pink 5mm bicone. Make a simple wire loop. Set aside.
  3. Onto one eye pin, place one crystal antique pink 5mm bicone. Make a simple wire loop. Set aside.
  4. Open the simple wire loop of the headpin with the bicone on it, the same way you would a jump ring, and attach it to one side of the square connector. Close the loop.
  5. On the other side of the connector, attach the eye pin with the bicone on it in the same way as the headpin. Close the loop.
  6. To the other side of the eye pin, attach the earring lever back finding.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-4391 -
    Project uses 2 pieces. You will need 2 packages.

  • SWC-9089 - Austrian Crystal, 4439 Square Ring Pendant 14mm, 1 Piece, Crystal Antique Pink
    Project uses 2 pieces. You will need 2 packages.

  • SWBB-15312 - Austrian Crystal, 5328 Bicone Beads 5mm, 20 Pieces, Crystal Antique Pink
    Project uses 4 pieces. You will need 1 package.

  • FHP-6250 - 22K Gold Plated Open Eye Pins 21 Gauge 1 Inch (x50)
    Project uses 2 pieces. You will need 1 package.

  • FEA-6016 - 22K Gold Plated Earring Findings Leverbacks (5 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • FHP-3020 - 22K Gold Plated 2mm Ball Head Pins 21 Gauge 1.5 Inch (20)
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Special Occasion
Ingredients FHP-6250, FEA-6016, FHP-3020, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Open Eye Pins, 22K Gold Plated, 1 Inch Long and 21 Gauge Thick (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$4.05 / Package | SKU: FHP-6250
Earring Findings, Interchangeable Leverbacks 17x9mm, Gold Plated (5 Pairs)
You will need 1 package(s).
1 package = 5 Pairs.
$4.67 / Package | SKU: FEA-6016
Head Pins, with Ball Head 1.5 Inches Long and 21 Gauge Thick, 22K Gold Plated (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$3.17 / Package | SKU: FHP-3020
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed