Retired - Crystal Harvest Necklace

PROJECT N512
Designer: Kathy Mannix
Skill Level: Beginner
Wear your Swarovski crystal harvest necklace with all the latest fall fashions.
Instructions
Thread onto the copper headpin (FHP-1035) a daisy (BMB-3217), the Swarvoski bead (SWC-5334), the flower beadcap (PND-7258), the small swirl beadcap (BMB-7053), another daisy, and one of the green Czech glass beads (BCP-3463). Make at least a 4mm inner diameter wire wrap loop so the chain can slide through easily. Trim off excess wire. Set aside.In order to patina the chain, follow the manufacturers directions on how to properly mix the liver of sulfur gel (XTL-8006). Drop the chain into the mixture until you are happy with the color. This process only takes a few seconds. Make sure you also mix a small amount (1 tsp) of baking soda and water to stop the patina process immediately. Dry the chain with a soft cloth or paper towel. You can use very fine steel wool to take off some of the patina. Hold the steel wool around the chain with one hand and slide the chain through over and over until it is the color you like.Thread the chain through the wire wrapped loop on the pendant you made earlier. To connect the clasp to the chain, you will be joining wrapped loops. First, cut a piece of 26 gauge wire (WCR-4226) 3 inches long. Now create the beginning of a loop, and thread it through the end link of the chain, then complete the wrapping of the loop. Now thread on a Czech glass bead, finish by wire wrapping a loop to the small loop on the clasp end (FCL-7065). Repeat this process with the other Czech glass bead and the hook part of the clasp. You're finished!Please refer to photo for more detailed information about this project.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWC-5334 -
    Project uses 1 piece. You will need 1 package.

  • PND-7258 - Vintaj Natural Brass Fastenables Fairy Petals Daisy Flower Stampings 13.5mm (4)
    Project uses 1 piece. You will need 1 package.

  • BMB-7053 - Antiqued Brass Corrugated Fluted Bead Caps 7mm (50)
    Project uses 1 piece. You will need 1 package.

  • BMB-3217 - TierraCast Antiqued Copper Plated Pewter Daisy Spacer Beads 4mm (50)
    Project uses 2 pieces. You will need 1 package.

  • BCP-3463 - Czech Fire Polished Glass Beads 4mm Round 'Ever Green Mix' (100)
    Project uses 3 pieces. You will need 1 package.

  • WCR-4349 - Vintaj Brass Bronze Colored Copper Wire 26 Gauge 120 Feet (1 Spool)
    Project uses 6 inches. You will need 1 package.

  • FCL-7065 -
    Project uses 1 piece. You will need 1 package.

  • FHP-1035 - Head Pins, 2 Inches Long and 22 Gauge Thick, 50 Pieces, Copper
    Project uses 1 piece. You will need 1 package.

  • CHA-9746 - Antiqued Copper Plated 3.7mm x 6.7mm Ladder Chain - Bulk By The Foot
    Project uses 2 feet. You will need 2 packages.

Additional Information
Theme Autumn
Ingredients SWC-5334, PND-7258, BMB-7053, BMB-3217, BCP-3463, WCR-4349, FCL-7065, FHP-1035, CHA-9746,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Vintaj Natural Brass Fastenables Fairy Petals Daisy Flower Stampings 13.5mm (4)
You will need 1 package(s).
1 package = 4 Pieces.
$2.25 / Package | SKU: PND-7258
TierraCast Antiqued Copper Plated Pewter Daisy Spacer Beads 4mm (50)
You will need 1 package(s).
1 package = 50 Pieces.
$4.35 / Package | SKU: BMB-3217
Czech Fire Polished Glass Beads 4mm Round 'Ever Green Mix' (100)
You will need 1 package(s).
1 package = 100 Pieces.
$3.49 / Package | SKU: BCP-3463
Vintaj Brass Bronze Colored Copper Wire 26 Gauge 120 Feet (1 Spool)
You will need 1 package(s).
1 package = 1 Spool.
$9.49 / Package | SKU: WCR-4349
Head Pins, 2 Inches Long and 22 Gauge Thick, 50 Pieces, Copper
You will need 1 package(s).
1 package = 50 Pieces.
$2.29 / Package | SKU: FHP-1035
Antiqued Copper Plated Ladder Chain, 3.7mm, by the Foot
You will need 2 package(s).
1 package = By The Foot.
$2.65 / Package | SKU: CHA-9746
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed