Retired - Cosmic Diva Earrings in Jet Pack

PROJECT E1030
Designer: Megan Milliken
Skill Level: Beginner
These futuristic earrings feature SWAROVSKI ELEMENTS crystal components and would be a fun and funky accent for when you're feeling out of this world!
Instructions
Remember to double these instructions to create your matched pair of earrings.
  1. Apply a small amount of E6000 adhesive to the backside of a jet black 20mm crystal cosmic ring, making sure you keep your glue to the inner part of the back of the ring. If your glue goes too far to the outside, it will show on the sides of your earring.
  2. Place your cosmic ring glue side down onto a 19.5mm silver filled stamping blank, making sure it's completely centered. Allow glue to set for an hour before continuing.
  3. Place a good amount of E6000 into the center of the cosmic ring on the stamping blank. There should be a good sized dab, but not too much. It should be less than half way up the center of the ring.
  4. Place a 14mm crystal AB rivoli point side down into the glue in the center of the ring. Make sure it's centered and leave to dry overnight.
  5. Put a 6mm crystal AB bicone bead onto a 1 1/2", 21 gauge silver plated eye pin. Create a simple wire loop after the bead and trim the excess.
  6. Use the loops on the ends of your eye pin to attach one end to your crystals on the blank and the other end to a silver filled long angled earring hook.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWC-9025 - Swarovski Crystal, 4139 Cosmic Ring Pendant 20mm, 1 Piece, Jet
    Project uses 2 pieces. You will need 2 packages.

  • PND-3018 - Silver Filled Stamping Blank, Circle With Loop 19.5mm, 1 Piece, Silver
    Project uses 2 pieces. You will need 2 packages.

  • SWC-9351 - Swarovski Crystal, 1122 Rivoli Fancy Stones 14mm, 2 Pieces, Crystal AB Sf
    Project uses 2 pieces. You will need 1 package.

  • SWBB-1601 - Swarovski Crystal, 5328 Bicone Beads 6mm, 20 Pieces, Crystal AB
    Project uses 2 pieces. You will need 1 package.

  • FHP-6260 - Silver Plated Open Eye Pins 21 Gauge 1.5 Inch (x50)
    Project uses 2 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Special Occasion
Ingredients SWC-9025, PND-3018, SWC-9351, SWBB-1601, FHP-6260, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Swarovski Crystal, #1122 Rivoli Fancy Stones 14mm, 2 Pieces, Crystal AB Foiled
You will need 1 package(s).
1 package = 2 Pieces.
$3.39 / Package | SKU: SWC-9351
Swarovski Crystal, #5328 Bicone Beads 6mm, 20 Pieces, Crystal AB
You will need 1 package(s).
1 package = 20 Pieces.
$4.99 / Package | SKU: SWBB-1601
Silver Plated Open Eye Pins 21 Gauge 1.5 Inch (x50)
You will need 1 package(s).
1 package = 50 Pieces.
$3.39 / Package | SKU: FHP-6260
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$1.89 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Beadsmith Wire Looping Pliers - Concave And Round Nose
$12.59 / Package | SKU: XTL-5032
Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed