Click or scroll to zoom
Tap or pinch to zoom
Retired - Copper Spring Earrings
Retired - Copper Spring Earrings

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Copper Spring Earrings

PROJECT E1070
Designer: Megan Milliken
Skill Level: Beginner
These charmingly simple earrings are fun and cheerful for spring, with spiral butterfly charms and pretty crystal mini beads.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. Place an 8x10mm fern green oval crystal mini bead onto a 20 gauge copper eye pin. Create a simple wire loop after the bead.
  2. Open the loop you just made and hang a copper plated pewter butterfly charm on it; close the loop.
  3. Open the top loop on the eye pin and attach a copper plated pewter dome post stud earring; close the loop.
  4. Attach a clear rubber earring back to the earring post.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-5190 - TierraCast Copper Plated Pewter Spiral Butterfly Charm 15mm
    Project uses 2 pieces. You will need 2 packages.

  • SWBB-7441 - Austrian Crystal, 5051 Oval Mini Beads 10mm, 2 Pieces, Fern Green
    Project uses 2 pieces. You will need 1 package.

  • FEA-1502 - TierraCast Copper Plated Pewter Stud Earrings Dome Post & Ring 8mm
    Project uses 2 pieces. You will need 1 package.

  • FHP-6221 - Real Copper Open Eye Pins 20 Gauge 1 7/8 Inches (x20)
    Project uses 2 pieces. You will need 1 package.

  • FEA-1006 - Clear Rubber Bullet Clutch Earring Safety Backs (144)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Spring, Autumn
Ingredients PND-5190, FEA-1502,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 2 package(s).
1 package = .
/ Package | SKU: PND-5190
You will need 1 package(s).
1 package = .
/ Package | SKU: FEA-1502
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$6.29 / Package | SKU: XTL-5511
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
$16.85 / Package | SKU: XTL-5600
The Beadsmith Jewelry Fine Round Nose Micro Pliers
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed