Retired - Coastal Sea Necklace

PROJECT N2035
Designer: Kat Silvia
Skill Level: Beginner
The Vintaj natural brass pairs wonderfully with the Toho hybrid Picasso seed beads to create this light beachy necklace.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a necklace that is about 17 inches long.
  1. Begin by cutting 20" of beading wire. Place your bead stopper about 2 inches from the end.
  2. Onto the beading wire you will thread 1 Toho hybrid opaque gray picasso 6/0 bead; 20 Toho hybrid turquoise picasso 11/0 beads. Repeat this pattern 12 more times. Finish with one 6/0 bead.
  3. Now thread on 1 crimp bead. Thread the wire through one 9mm jump ring (make sure the jump ring is closed) and thread it back down through the crimp bead. Pull snug. Crimp the crimp bead. Remove the bead stopper from the other side and repeat this process.
  4. Lay this beaded piece out in front of you. Counting the 6/0 beads from the left; count 5 in to the center. On the right side of that bead, you are going to open one 5.25mm jump ring, attach one sand dollar charm and close it around the beaded strand. The 5th and 6th 6/0 toho beads will hold it in place, but the jump ring will float freely between these two 6/0 seed beads. Repeat this with the second sand dollar but counting the 6/0 beads from the left; count 9. This second jump ring with the second sand dollar will be between the 9th and 10th 6/0 Toho. Set aside this beaded piece.
  5. Take the strand of ribbon and thread onto the end 1 Toho 6/0 bead. Slide it down to the other end about 4 inches from the other end. It should be sung and hold in place. Repeat this six more times. Each time the bead should be about two inches away from the previous one. Set aside.
  6. Cut a piece of chain 16 inches in length. Find the center of this chain. Open one 5.25mm jump ring and attach the turtle pendant to the center link of the chain. Close the jump ring.
  7. Onto one end of the chain open a 5.25mm jump ring and attach this jump ring to one side of the 9mm jump ring attached to the strung beads. Close the jump ring.
  8. To tie on the ribbon, begin with the side that has the first Toho bead that you threaded on it, tie an overhand double knot to the 9mm jump ring.
  9. Now that all three strands (the beaded strand, the chain and the ribbon) are attached to the 9mm jump ring, you will form a very loose braid to intertwine these three strands.
  10. Holding the ends of these braided strand stable (after you have braided them), you will attach them to the 9mm jump ring on the beaded strand. For the chain, open one 5.25mm jump ring and close it around the 9mm jump ring. For the ribbon, tie an overhand double knot to the 9mm jump ring.
  11. For the clasp, open the loop on the hook, just as you would a jump ring and attach it to one 9mm jump ring. Close the loop on the hook.
  12. To the other side, open the loop of the eye clasp, same as you would a jump ring, and close it around the 9mm jump ring. Close the loop of the eye.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JSK-0288 - Toho Round Seed Beads 11/0 Y307 - Hybrid Turquoise Picasso (8 Grams)
    Project uses 1 tube. You will need 1 package.

  • JSF-0362 - Toho Round Seed Beads 6/0 Y312 - Hybrid Opaque Gray Picasso (8 Grams)
    Project uses 1 tube. You will need 1 package.

  • XCR-48095 - Silk Fabric Flat Silky Ribbon, 2cm Wide, 42 Inches Long, 1 Strand, Cream White
    Project uses 1 strand. You will need 1 package.

  • CHA-10064 - Vintaj Natural Brass 4x3.5mm Petite Oval Chain - Sold By The Foot
    Project uses 16 inches. You will need 2 packages.

  • PND-7099 - Vintaj Natural Brass Ocean Sand Dollar Charms 18mm (2)
    Project uses 2 pieces. You will need 1 package.

  • PND-7537 - Vintaj Natural Brass Stamping Pendant - Santa Fe Turtle 25 x 14mm (1)
    Project uses 1 piece. You will need 1 package.

  • XCR-5143 - Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, 30 Feet, Satin Silver
    Project uses 20 inches. You will need 1 package.

  • FCL-4640 - Vintaj Natural Brass Hook And Eye Clasps (2 Sets)
    Project uses 1 piece. You will need 1 package.

  • FJR-5352 - Vintaj Natural Brass Jump Rings 5.25mm Open 18 Gauge (20)
    Project uses 5 pieces. You will need 1 package.

  • FJR-9070 - Vintaj Natural Brass Etched Open Jump Rings 9mm 17 Gauge (12)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1252 - Economy Brass Crimp Beads 2mm x 1.5mm (x100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
Additional Information
Theme Nautical
Ingredients XCR-5143, FCL-4640, FJR-5352, FCR-1252,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, Satin Silver (30 Feet)
You will need 1 package(s).
1 package = 1 Spool.
$14.69 / Package | SKU: XCR-5143
Vintaj Clasps, Hook and Eye Natural Brass (2 Sets)
You will need 1 package(s).
1 package = 2 Sets.
$4.89 / Package | SKU: FCL-4640
Vintaj Natural Brass Jump Rings 5.25mm Open 18 Gauge (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$2.59 / Package | SKU: FJR-5352
Crimp Beads, Barrel 2x1.5mm, Brass (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$2.69 / Package | SKU: FCR-1252
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed