Click or scroll to zoom
Tap or pinch to zoom
Retired - Butterfly Grove Necklace
Click or scroll to zoom
Tap or pinch to zoom
Retired - Butterfly Grove Necklace
Click or scroll to zoom
Tap or pinch to zoom
Retired - Butterfly Grove Necklace
Retired - Butterfly Grove Necklace

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Butterfly Grove Necklace

PROJECT N1009
Designer: Megan Milliken
Skill Level: Beginner
An eye-catching laser cut purple wooden butterfly pendant hangs from beige pleather cord with cute little polka dot ceramic beads in this necklace. Quick and easy to make, it'll bring to mind springtime strolls
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Begin by cutting a 3' length of 2mm beige pleather cord.
  2. Place a 7mm, 18 gauge antique brass plated jump ring onto each of the holes in a maple wood laser cut butterfly pendant with purple stained cut out. Thread your cord through the jump rings to hang the pendant.
  3. Make an overhand knot in the cord about 2 1/2" up from the pendant on either side. Slide a lime green Golem Studio ceramic polka dot round bead onto each side of the cord above the knots.
  4. Make an overhand knot directly after each lime green bead.
  5. Make an overhand knot in the cord about 2" up from the last knot on either side. Slide a light blue Golem Studio ceramic polka dot round bead onto each side of the cord above the last knots.
  6. Make an overhand knot directly after each light blue bead.
  7. Bring the ends of the cord around, making the necklace into a loop with the ends overlapping. Tie an overhand knot about 1 3/4" from the end of one of the cord ends, catching the other strand of cord in the middle of the knot. Repeat with the other cord end. See photo for more information on how the knots should be arranged.
  8. Pull the knots nice and tight. You can then slide the knots back and forth on the strands to adjust the length of your necklace.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-4125 - Beige Pleather Cord 2mm (Faux Natural Color Leather) 3 Meters
    Project uses 1 package. You will need 1 package.

  • BWD-7452 -
    Project uses 1 piece. You will need 1 package.

  • BWC-265 - Golem Design Studio Ceramic Beads, 14mm Round Polka Dots, 2 Pieces, Lime Green
    Project uses 2 pieces. You will need 1 package.

  • BWC-266 - Golem Design Studio Ceramic Beads, 14mm Glazed Round Polka Dots, 2 Pieces, Light Blue
    Project uses 2 pieces. You will need 1 package.

  • FJR-5179 - Antiqued Brass Open Jump Rings 7mm 18 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
Additional Information
Ingredients XCR-4125, BWD-7452, BWC-265, BWC-266, FJR-5179,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$6.29 / Package | SKU: XTL-5511
/ Package | SKU: XTL-5700

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed