Retired - Bubble Halloween Earring

Name: Retired - Bubble Halloween Earring
Brand: Beadaholique
SKU: E699
Availability: OutOfStock

PROJECT E699

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Happy Halloween! These pretty earrings inspire smiles and good times; they are both fun and lighthearted. Very lightweight, these black and orange themed earrings are easy to wear and easy to make.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Don't forget to double the instructions to make your matched set!

Start by punching a hole up near the edge of your 16mm orange Lillypilly circle stamping with bubble pattern.
Please look at the photo on the placement of the circle stampings. Place a small dab (do not use too much) of E6000 glue on the bottom backside (blank) edge of your 19mm black Lillypilly circle stamping with bubble pattern. Overlay this edge on top of your 25mm orange Lillypilly circle stamping with bubble pattern. Press into place and let dry. Next place a small dab of E6000 glue on the bottom backside edge of your 16mm orange Lillypilly circle stamping with bubble pattern (opposite edge from where your hole is punched) and overlay this edge on top of your 19mm black Lillypilly circle stamping with bubble pattern. Press into place and let dry.
Place 1 Czech glass druk 4mm round jet black bead onto your black finish niobium earring (unfinished) hook. Make a loop at the base of the hook, finishing the earring hook.
Open the loop at the base of the earring hook (like you would open a jump ring) and link it to the hole you punched in the smallest round. Close the loop.
Happy Halloween!

WHAT YOU'LL NEED: (scroll down for purchase options)

FEA-1550 - TierraCast Black Finish Niobium Unfinished Earring Hook 20 Gauge (2 Pairs)
Project uses 1 pair. You will need 1 package.

LIL-0446 -
Project uses 2 pieces. You will need 1 package.

LIL-0428 - Lillypilly Aluminum Circle Stamping Orange W/Bubble Pattern 16mm (2)
Project uses 2 pieces. You will need 1 package.

LIL-0433 -
Project uses 2 pieces. You will need 1 package.

BCP-7490 - Czech Glass Druk Beads 4mm Round 'Jet Black' (100)
Project uses 2 pieces. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-0060 - Eurotool EuroPunch 1.25mm Round Hole Punch Pliers For Sheet Metal
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers

Additional Information

Theme	Halloween
Ingredients	FEA-1550, BCP-7490, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: FEA-1550

Czech Glass Druk Beads 4mm Round 'Jet Black' (100 pcs)

            Czech Glass Druk Beads 4mm Round 'Jet Black' (100 pcs)
        
You will need 1 package(s).
1 package = 100 Pieces.

                $1.99
            
             / Package | SKU: BCP-7490

Sold out

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.09
            
             / Package | SKU: XTL-1054