Click or scroll to zoom
Tap or pinch to zoom
Retired - Black-Eyed Owl Ring
Click or scroll to zoom
Tap or pinch to zoom
Retired - Black-Eyed Owl Ring
Retired - Black-Eyed Owl Ring

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Black-Eyed Owl Ring

PROJECT R3006
Designer: Karlin Jones
Skill Level: Beginner
With its antiqued silver plated owl face stamping and jet hematite Austrian crystal rhinestone flatbacks, this trendy owl-themed ring can be made in a few simple steps.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

The back of this owl stamping is hollow and the eye area protrudes out. Be sure to use enough glue on the flat back of your ring to ensure a secure fit. You may also want to use a pair of chain nose pliers to flatten down the protruding eyes so the rhinestone flatbacks glue on flat.
  1. Begin by adding a dime sized amount of glue onto the flat pad of your adjustable ring.
  2. Take your owl stamping, flip it over, and place it onto the flat pad of your ring. Since the back of your owl face stamping is hollow, press your ring down all the way into the glue until it is secure. If you feel as though more glue is needed, go ahead and add more. The glue will dry in the crevices of the owl stamping.
  3. Set your ring aside, facing up, until it is fully dry.
  4. Next, add a small dab of glue onto the eyes of the owl stamping. Then using a pair of tweezers, gently glue on the jet hematite rhinestone flatbacks.
  5. Keep your ring still facing up and set aside to dry.
  6. Your ring is done.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-10001 - Antiqued Silver Plated Owl Face Stamping 24.5x20mm (1)
    Project uses 1 piece. You will need 1 package.

  • JR-1058 - Silver Plated Adjustable Ring With 16mm Pad For Gluing (4)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • SWF-22015 - Austrian Crystal, Round Flatback Rhinestone Hotfix SS20 4.6mm, 50 Pieces, Jet Hematite
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-4000 - Beadsmith Bead And Pearl Knotting Tweezers
Additional Information
Ingredients JR-1058, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Adjustable Ring With 16mm Pad For Gluing (4 pcs)
Silver Plated Adjustable Ring With 16mm Pad For Gluing (4 pcs)
You will need 1 package(s).
1 package = 4 Pieces.
$4.85 / Package | SKU: JR-1058
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Bead And Pearl Knotting Tweezers
The Beadsmith Bead And Pearl Knotting Tweezers
$2.79 / Package | SKU: XTL-4000

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed