Retired - Bali Tassel Earrings

PROJECT E2197
Designer: Kat Silvia
Skill Level: Intermediate
This global inspired design provides and easy, breezy island style with it's white tassels and gemstone beads.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
  1. Cut off 6 inches of beading wire.
  2. Carefully slip three tassels off of the cord and thread the beading wire through the loops of the tassels.
  3. Gather the two ends of the wire and slip them up through the cone. Slip on one gemstone bead and one crimp tube.
  4. Take both wires through the closed jump ring and back down thru the crimp tube. Crimp the crimp tube. Trim any excess wire. Add a crimp cover.
  5. Open the loop of the earring finding, same as you would a jump ring, and attach it to the closed jump ring. Close the loop.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FEA-9421 - Large French Ear Wire, 16mm Long 22 Gauge Wire, 20 Pieces, Silver Plated
    Project uses 2 pieces. You will need 1 package.

  • FJR-4013 - Silver Plated Closed Jump Rings 5mm 19 Gauge (20)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1715 - BeadSmith Crimp Tubes, 2x2mm, 100 Pieces, Silver Plated
    Project uses 2 pieces. You will need 1 package.

  • FCR-1054 - Shiny Silver Tone Crimp Bead Covers 4mm (x144)
    Project uses 2 pieces. You will need 1 package.

  • BMB-1077 - Lead-Free Pewter, Flat Cone Reducer Beads 16.5x18mm, 2 Pieces, Antiqued Silver
    Project uses 2 pieces. You will need 1 package.

  • SPAG-601 - White Agate Gemstone 6mm Faceted Round Beads - 15.5 Inch Strand
    Project uses 2 pieces. You will need 1 package.

  • PTS-3513 - Nylon Cord, Tassels 35mm, 6 Pieces, White
    Project uses 6 pieces. You will need 1 package.

  • XCR-1236 - BeadSmith Flex-Rite Beading Wire, 49 Strand .018 Thick, 10 Foot Spool, Pearl Silver
    Project uses 12 Inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
Additional Information
Theme Yoga, Summer, Boho
Ingredients FCR-1715, FCR-1054,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
The Beadsmith Crimp Beads, Tube 2x2mm, Silver Plated (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$1.99 / Package | SKU: FCR-1715
Crimp Bead Covers, 4mm, Silver Tone (144 Pieces)
You will need 1 package(s).
1 package = 144 Pieces.
$18.35 / Package | SKU: FCR-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514
Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed