Retired - Ayelet Earrings

PROJECT E7007
Designer: Rachel Zaimont
Skill Level: Intermediate
Hammered brass findings lend old-world charm to these earrings, the perfect accessory for strolling through open-air markets down ancient cobblestone alleys.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
  1. Using flush cutters, cut three pieces of chain -- one 3/4 inch piece, one 1 1/2 inch piece, and one 2 1/2 inch piece. Set these aside.
  2. Take one head pin and string one Czech glass bead, and make a wrapped wire loop. Repeat twice more, so you have three wire-wrapped bead dangles.
  3. Using your pliers, open a jump ring. Attach one Czech glass bead dangle to the middle hole on the bottom of one brass fan connector.
  4. Open another jump ring. Slide on the first link of all three pieces of chain, followed by another Czech glass bead dangle. Attach this jump ring to the hole on the left side of the brass connector.
  5. Open a third jump ring and slide on the last link of all three pieces of chain, followed by the third Czech glass bead dangle. Attach this jump ring to the hole on the right side of the brass connector, creating a cascade of chain between the left and right holes.
  6. Make sure all three beads are dangling in front of the chain. Your earring is now complete!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-1270 - Brass 3 To 1 Hammered Fan Connector 22x15mm (2 Pieces)
    Project uses 2 pieces. You will need 1 package.

  • FEA-6020 - Antiqued Brass Leverback Earrings - 10 Earring Findings
    Project uses 2 pieces. You will need 1 package.

  • BCP-34141 - Czech Fire Polished Glass Beads 4mm Round Coral Pink/Topaz (50)
    Project uses 6 pieces. You will need 1 package.

  • FJR-5450 - Antiqued Brass Open Jump Rings 4mm 22 Gauge (x100)
    Project uses 6 pieces. You will need 1 package.

  • FHP-6301 - Antiqued Brass Head Pins 1.5 Inches Long/21 Gauge (x50)
    Project uses 6 pieces. You will need 1 package.

  • CHA-9643 - Antiqued Brass Figure Eight Chain 2mm Bulk By The Foot
    Project uses 1 foot. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients FEA-6020, BCP-34141, FJR-5450, CHA-9643,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Findings, Leverback Earrings, Antiqued Brass (5 Pairs)
You will need 1 package(s).
1 package = 5 Pairs.
$4.25 / Package | SKU: FEA-6020
Czech Fire Polished Glass Beads 4mm Round Coral Pink/Topaz (1 Strand)
You will need 1 package(s).
1 package = 1 Strand.
$1.99 / Package | SKU: BCP-34141
Antiqued Brass Open Jump Rings 4mm 22 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$2.89 / Package | SKU: FJR-5450
You will need 1 package(s).
1 package = .
/ Package | SKU: CHA-9643
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed