Retired - Auric Glow Set

PROJECT S8006
Designer: Alexandra Smith
Skill Level: Beginner
The Golden Shadow Swarovski crystals featured in this set cast a warm glow, with nature-inspired findings to complete the look.
Instructions
This necklace measures 18 inches including the clasp. The amount of chain suggested for purchase allows for an adjustable length of up to a maximum of 24 inches. By following the instructions below, you will make one earring. Repeat steps 7-8 to make the second earring.
  1. Using flush cutters, cut two 7.5 inch lengths of gold chain.
  2. Open a 4mm jump ring, string on the end link of one 7.5 inch length of gold chain, and attach the chain to one side loop of the gold fern connector bar. Close the jump ring.
  3. Repeat step 2 to add the second length of gold chain to the other side loop of the gold fern connector bar.
  4. Open a 4mm jump ring, string on the other end link of one length of gold chain, and attach it to the loop at the back of the clasp. Close the jump ring.
  5. Open another 4mm jump ring and attach it to the end of the other length of gold chain. Close the jump ring.
  6. Next, set the gold bail over the center point of the fern connector bar so that it sits evenly with one prong coming over each side. Then bring the crystal leaf into position between the two prongs, and press the prongs into the top hole of the leaf until the pendant is fully captured between the prongs. Your necklace is now complete.
  7. To make one earring, take one TierraCast earring bail and open it slightly wider using pliers. Then insert a crystal briolette between the two prongs of the bail, and pinch the prongs securely into the holes of the bead.
  8. Take one earring wire and open the loop slightly the same way you would open a jump ring. Slide the loop of the earring bail onto the earring wire from the long end toward the front, so that it sits in the loop. Close the loop of the earring wire over the bail.
  9. Repeat steps 7-8 to make the second earring.
  10. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCL-4720 - 22K Gold Plated Curved Lobster Clasps 10mm (6)
    Project uses 1 piece. You will need 1 package.

  • CHA-0464 - Vintaj Vogue Bulk Chain, Flat Oval Cable Links 3x2mm, Sold By The Foot, Raw Brass
    Project uses 15 inches. You will need 2 packages.

  • SWC-9128 - Swarovski Crystal, 6735 Leaf Pendant 26x16mm, 1 Piece, Crystal Golden Shadow
    Project uses 1 piece. You will need 1 package.

  • FCO-4021 - 22K Gold Plated Pinch Bail For Stone & Crystal Pendants (10)
    Project uses 1 piece. You will need 1 package.

  • FCO-3472 - Nunn Design Antiqued 24kt Gold Plated Pewter Fern Connector Bar 33mm (1)
    Project uses 1 piece. You will need 1 package.

  • FJR-5240 - 22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
    Project uses 4 pieces. You will need 1 package.

  • FCO-3016 - TierraCast 22K Gold Plated Pewter Bail For 11mm SWAROVSKI ELEMENTS Briolette (4)
    Project uses 2 pieces. You will need 1 package.

  • SWC-4308 - Swarovski Crystal, 6012 Briolette Pendants 11x10mm, 2 Pieces, Crystal Golden Shadow
    Project uses 2 pieces. You will need 1 package.

  • FEA-4030 - Bali Style 1 Ball Gold Plated Earring Hooks (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Vintage Look, Autumn
Ingredients FCL-4720, CHA-0464, SWC-9128, FCO-4021, FCO-3472, FJR-5240, FCO-3016, SWC-4308, FEA-4030,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
22K Gold Plated Curved Lobster Clasps 10mm (6)
You will need 1 package(s).
1 package = 6 Pieces.
$1.69 / Package | SKU: FCL-4720
22K Gold Plated Pinch Bail For Stone & Crystal Pendants (10)
You will need 1 package(s).
1 package = 10 Pieces.
$1.64 / Package | SKU: FCO-4021
22K Gold Plated Open Jump Rings 4mm 21 Gauge (x100)
You will need 1 package(s).
1 package = 100 Pieces.
$2.17 / Package | SKU: FJR-5240
Real 22K Gold Plated Pewter Bail For 11mm Swarovski Crystal Briolette (4)
You will need 1 package(s).
1 package = 4 Pieces.
$2.85 / Package | SKU: FCO-3016
Swarovski Crystal, #6012 Briolette Pendants 11x10mm, 2 Pieces, Crystal Golden Shadow
You will need 1 package(s).
1 package = 2 Pieces.
$2.24 / Package | SKU: SWC-4308
Bali Style 1 Ball Gold Plated Earring Hooks 21mm with 1.5mm Ball (50)
You will need 1 package(s).
1 package = 50 Pieces.
$10.19 / Package | SKU: FEA-4030
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Beadsmith Jewelry Fine Round Nose Micro Pliers
$5.62 / Package | SKU: XTL-5514
Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed